Hovatek Forum MOBILE Android WIKO FEVER cant start after SP Flash Tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


WIKO FEVER cant start after SP Flash Tool

WIKO FEVER cant start after SP Flash Tool

Pages (2): 1 2 Next
zzzzzking
zzzzzking
zzzzzking
Enthusiastic Member
8
28-12-2017, 06:12 PM
#1



My friend start to sell phones. And he give me a newone WIKO FEVER dual SIM, which not working. I find that is no IMEI . I try to write IMEI with engineering mode but i cant do it anything. Then I try with SP Flash Tool, and after that I cant start phone. 

What should I do now?
X3non
X3non
X3non
Recognized Contributor
22,062
28-12-2017, 07:21 PM
#2
(28-12-2017, 06:12 PM)zzzzzking My friend start to sell phones. And he give me a newone WIKO FEVER dual SIM, which not working. I find that is no IMEI . I try to write IMEI with engineering mode but i cant do it anything. Then I try with SP Flash Tool, and after that I cant start phone. 

What should I do now?

in details, what exactly did you do in SP flash tool? 
also was the process in SP flash tool successful with a green tick?
zzzzzking
zzzzzking
zzzzzking
Enthusiastic Member
8
29-12-2017, 08:33 AM
#3
(28-12-2017, 07:21 PM)X3non
(28-12-2017, 06:12 PM)zzzzzking My friend start to sell phones. And he give me a newone WIKO FEVER dual SIM, which not working. I find that is no IMEI . I try to write IMEI with engineering mode but i cant do it anything. Then I try with SP Flash Tool, and after that I cant start phone. 

What should I do now?

in details, what exactly did you do in SP flash tool? 
also was the process in SP flash tool successful with a green tick?

I attached sp flash tools setings. I download a folder (Wiko_Fever_V18_MT6753) with firmware and FLASH TOOLS.

Process was successful with green tick.  But I cant start it now. When is conected there is just a red light on, without image when is charging battery.

When i connect to laptop now i cant see device, and when I start FLASH tools i get a message (look att)
This post was last modified: 29-12-2017, 08:34 AM by zzzzzking.
Attached Files
.jpg
Screenshot_1.jpg
Size: 419.72 KB / Downloads: 9
.jpg
Screenshot_2.jpg
Size: 125.98 KB / Downloads: 7
.jpg
Screenshot_3.jpg
Size: 414.78 KB / Downloads: 9
X3non
X3non
X3non
Recognized Contributor
22,062
29-12-2017, 03:48 PM
#4
(29-12-2017, 08:33 AM)zzzzzking I attached sp flash tools setings. I download a folder (Wiko_Fever_V18_MT6753) with firmware and FLASH TOOLS.

Process was successful with green tick.  But I cant start it now. When is conected there is just a red light on, without image when is charging battery.

When i connect to laptop now i cant see device, and when I start FLASH tools i get a message (look att)

connect your phone to a charger and leave it to charge for 1-2hrs, if it doesnt come up then download and flash your device with the second wiko fever rom @ https://www.hovatek.com/forum/thread-9488.html
zzzzzking
zzzzzking
zzzzzking
Enthusiastic Member
8
08-01-2018, 09:48 AM
#5



I did it with second ROM.

But I have not IMEI on both SIM cards. And I cant use it now
This post was last modified: 08-01-2018, 09:49 AM by zzzzzking.
xerxes
xerxes
xerxes
Senior Member
8,355
08-01-2018, 01:36 PM
#6
(08-01-2018, 09:48 AM)zzzzzking I did it with second ROM.

But I have not IMEI on both SIM cards. And I cant use it now

write IMEI using GSM Alladdin @ https://www.hovatek.com/forum/thread-116.html
hovatek
hovatek
hovatek
Administrator
49,570
08-01-2018, 01:51 PM
#7
(08-01-2018, 09:48 AM)zzzzzking I did it with second ROM.

But I have not IMEI on both SIM cards. And I cant use it now

What does your phone show under Settings > About > Baseband?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
zzzzzking
zzzzzking
zzzzzking
Enthusiastic Member
8
08-01-2018, 03:05 PM
#8
(08-01-2018, 01:51 PM)hovatek
(08-01-2018, 09:48 AM)zzzzzking I did it with second ROM.  

But I have not IMEI on both SIM cards. And I cant use it now

What does your phone show under Settings > About > Baseband?

MOLY.LR9.W144.MD.LWTG.MP.V79.P4,
2016/05/05 14:16
xerxes
xerxes
xerxes
Senior Member
8,355
08-01-2018, 04:27 PM
#9
(08-01-2018, 03:05 PM)zzzzzking
(08-01-2018, 01:51 PM)hovatek
(08-01-2018, 09:48 AM)zzzzzking I did it with second ROM.  

But I have not IMEI on both SIM cards. And I cant use it now

What does your phone show under Settings > About > Baseband?

MOLY.LR9.W144.MD.LWTG.MP.V79.P4,
2016/05/05 14:16

Write IMEI using the GSM Aladdin or Maui Meta method, see link on my previous reply.
zzzzzking
zzzzzking
zzzzzking
Enthusiastic Member
8
10-01-2018, 09:49 AM
#10



(08-01-2018, 04:27 PM)innagee
(08-01-2018, 03:05 PM)zzzzzking
(08-01-2018, 01:51 PM)hovatek
(08-01-2018, 09:48 AM)zzzzzking I did it with second ROM.  

But I have not IMEI on both SIM cards. And I cant use it now

What does your phone show under Settings > About > Baseband?

MOLY.LR9.W144.MD.LWTG.MP.V79.P4,
2016/05/05 14:16

Write IMEI using the GSM Aladdin or Maui Meta method, see link on my previous reply.

PROGRAM DONT SEE DEVICE.  Sad
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram