Hovatek Forum MOBILE Android Itel A12 dead when flashing stock ROM was interrupted
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Itel A12 dead when flashing stock ROM was interrupted

Itel A12 dead when flashing stock ROM was interrupted

Pages (2): Previous 1 2
pjack16
pjack16
pjack16
Enthusiastic Member
14
26-05-2018, 02:36 PM
#11



(26-05-2018, 11:31 AM)hovatek
(25-05-2018, 10:56 PM)pjack16 Sir, i don't have any other batteries or a booster, but right now, after a while of recharging, i plugged it on my PC, and it shows a dialog box that says "usb device not recognized". Is there aything i can do to make it being at least recognised like once? And thanks in advance

Still leave to charge a while. Also check device manager for what the phone gets detected as

Aftr lik 6 hrs of recharging, i connected it to my PC, and when it responds, it says "Unrecognised device". But it doesnt respod everytime, like once in every three times of plugging and unplugging. But what is that what it shows when it responds.
hovatek
hovatek
hovatek
Administrator
49,570
27-05-2018, 08:29 PM
#12
(26-05-2018, 02:36 PM)pjack16 Aftr lik 6 hrs of recharging, i connected it to my PC, and when it responds, it says "Unrecognised device". But it doesnt respod everytime, like once in every three times of plugging and unplugging. But what is that what it shows when it responds.

USB not recognized could indicate a corrupted partition table (or emmc), driver issues or battery (power issues).
Most common is driver issues. Take out and re-insert the battery then hold Volume down button when you connect to PC via USB cord. This often helps force-install drivers
This post was last modified: 27-05-2018, 08:31 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
babsofe
babsofe
babsofe
Newbie
1
04-06-2018, 06:50 AM
#13
(25-05-2018, 10:56 PM)pjack16
(25-05-2018, 07:00 PM)X3non
(25-05-2018, 04:06 PM)pjack16 Sir, i did as you said. Removed my spd drivers, and installed the ones you suggested, but still my phone wont gt recognised. Even when i recharge it using my PC or from the wall, it's just black screen, no even the battery icon to show if it's recharging. But the phone gets a bit warm onn its upper back.

try to get that battery boosted if you can OR try a different battery

Sir, i don't have any other batteries or a booster, but right now, after a while of recharging, i plugged it on my PC, and it shows a dialog box that says "usb device not recognized". Is there aything i can do to make it being at least recognised like once? And thanks in advance
dudadoit
dudadoit
dudadoit
Newbie
1
28-11-2018, 10:38 AM
#14
i´ve the same problem the spd tool does _BKF_NV error
xerxes
xerxes
xerxes
Senior Member
8,355
28-11-2018, 03:21 PM
#15



(28-11-2018, 10:38 AM)dudadoit i´ve the same problem the spd tool does _BKF_NV error

Please create a new thread, this is someone else's support thread.
See https://www.hovatek.com/forum/thread-514.html for how to create a new thread.

Sent from my M5 mini using Hovatek Mobile
hovatek
hovatek
hovatek
Administrator
49,570
28-11-2018, 03:23 PM
#16
(28-11-2018, 10:38 AM)dudadoit i´ve the same problem the spd tool does _BKF_NV error

Do as @innagee said.
You could checkout https://www.hovatek.com/forum/thread-23211.html
This post was last modified: 28-11-2018, 03:25 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram