[Please help] Please provide Nokia 1 SP Flash Tool flashable firmware
[Please help] Please provide Nokia 1 SP Flash Tool flashable firmware
(05-09-2018, 04:19 PM)Jemoh ...
I suspect the bootloader might be encrypted or secured. However,i unlocked the bootloader. I did a mistake when formating and formatted the preloader. Thats my problem. the phone wont boot,charge or display anything on the screen. When i power on the phone it vibrates on intervals of 7 seconds and will keep on doing that until i remove the battery. Kindly assist on any possible ways to get rid of this. Am left with no phone. Kindly help!
Thanks!
(05-09-2018, 06:11 PM)Jemoh Miracle crack with loader.
I did not format using spft. I used fastboot since I unlocked its bootloader.i could've used spft but the roms could not be flashed using spft. I tried miracle but gave Boot error. I've tried CM2 also returns Boot erro.
Nokia 1 TA-1047
Thanks for the reply.
(05-09-2018, 06:39 PM)X3non(05-09-2018, 06:11 PM)Jemoh Miracle crack with loader.
I did not format using spft. I used fastboot since I unlocked its bootloader.i could've used spft but the roms could not be flashed using spft. I tried miracle but gave Boot error. I've tried CM2 also returns Boot erro.
Nokia 1 TA-1047
Thanks for the reply.
here, try this firmware at http://www.mediafire.com/file/0xgn9o0b71...180401.zip
you'll also have to use the custom DA file you downloaded
(06-09-2018, 09:10 AM)EMMANUS You have to use cm2, install supplementary file for cm2, which will enable you activate the last option in the chipset selection tab, once you can activate that option, you will know by clicking on the next tab 's dropdown arrow, if it works, choose nokia 3, then proceed with the flashing.
If it does not work, install supplementary files again reboot, unplug dongle, just try anything to make it work. It is crazy sometimes.
Note, I don't have cm2 dongle, but I have done this, with someone's own.
Was it a crack or original?