Hovatek Forum MOBILE Android [Please help] MOTO XT 1773
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] MOTO XT 1773

[Please help] MOTO XT 1773

Pages (2): 1 2 Next
ov3r5y5t3m
ov3r5y5t3m
ov3r5y5t3m
Enthusiastic Member
6
30-10-2018, 05:00 PM
#1



Hello ... After performing the flash procedure by SP Tools using the Stock Rom on my motorola XT1773 it did not turn on. Now you just connect and reconnect to the usb and when you try to use SP Tools again, it's just the DA download. I have already made all possible options regarding error (4001) and nothing. A help would be welcome!
Attached Files
xerxes
xerxes
xerxes
Senior Member
8,355
30-10-2018, 06:30 PM
#2
(30-10-2018, 05:00 PM)ov3r5y5t3m Hello ... After performing the flash procedure by SP Tools using the Stock Rom on my motorola XT1773 it did not turn on. Now you just connect and reconnect to the usb and when you try to use SP Tools again, it's just the DA download. I have already made all possible options regarding error (4001) and nothing. A help would be welcome!

The phone requires Download Agent because it has a secured boot.
BTW, What's wrong with the phone and how did the problem start?
Were you able to successfully flash the phone using any firmware?
Also try the DA for your model @ https://www.hovatek.com/forum/thread-23365.html

Sent from my M5 mini using Hovatek Mobile
This post was last modified: 31-10-2018, 10:21 AM by xerxes.
ov3r5y5t3m
ov3r5y5t3m
ov3r5y5t3m
Enthusiastic Member
6
31-10-2018, 12:27 AM
#3
(30-10-2018, 06:30 PM)innagee
(30-10-2018, 05:00 PM)ov3r5y5t3m Hello ... After performing the flash procedure by SP Tools using the Stock Rom on my motorola XT1773 it did not turn on. Now you just connect and reconnect to the usb and when you try to use SP Tools again, it's just the DA download. I have already made all possible options regarding error (4001) and nothing. A help would be welcome!

The phone required Download Agent because it has a secured boot.
BTW, What's wrong with the phone and how did the problem start?
Were you able to successfully flash the phone using any firmware?
Also try the DA for your model @ https://www.hovatek.com/forum/thread-23365.html

Sent from my M5 mini using Hovatek Mobile

It was working normal ... was with the bootloader unlocked ... and with TWRP ... I wanted to put the original firmware of it: (RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC) .. I spent it using forum SP Tools + a DA here (Motorola XT1760, XT1761, XT1762, XT1763, XT1766, XT1770, XT1771, XT1772, XT1773) ... and it was usually until successful completion. Then as I said, I was restarting to finish the installation and did not call anymore, is giving this error. Begin the DA procedure and go there.
This post was last modified: 31-10-2018, 12:28 AM by ov3r5y5t3m.
X3non
X3non
X3non
Recognized Contributor
22,062
31-10-2018, 09:44 AM
#4
(31-10-2018, 12:27 AM)ov3r5y5t3m It was working normal ... was with the bootloader unlocked ... and with TWRP ... I wanted to put the original firmware of it: (RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC) .. I spent it using forum SP Tools + a DA here (Motorola XT1760, XT1761, XT1762, XT1763, XT1766, XT1770, XT1771, XT1772, XT1773) ... and it was usually until successful completion. Then as I said, I was restarting to finish the installation and did not call anymore, is giving this error. Begin the DA procedure and go there.

after flashing successfully,
is the phone totally dead OR it's just stuck on bootlogo or bootloop?
have you tried disconnecting / reconnecting the battery?
ov3r5y5t3m
ov3r5y5t3m
ov3r5y5t3m
Enthusiastic Member
6
31-10-2018, 02:27 PM
#5



(31-10-2018, 09:44 AM)X3non
(31-10-2018, 12:27 AM)ov3r5y5t3m It was working normal ... was with the bootloader unlocked ... and with TWRP ... I wanted to put the original firmware of it: (RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC) .. I spent it using forum SP Tools + a DA here (Motorola XT1760, XT1761, XT1762, XT1763, XT1766, XT1770, XT1771, XT1772, XT1773) ... and it was usually until successful completion. Then as I said, I was restarting to finish the installation and did not call anymore, is giving this error. Begin the DA procedure and go there.

after flashing successfully,
is the phone totally dead OR it's just stuck on bootlogo or bootloop?
have you tried disconnecting / reconnecting the battery?


Totally dead ... after successfully passing the rom ... died ... recognizes only in USB ...
Yes ... I also tried to remove the battery ...
This post was last modified: 31-10-2018, 02:33 PM by ov3r5y5t3m.
hovatek
hovatek
hovatek
Administrator
49,570
31-10-2018, 04:53 PM
#6
(31-10-2018, 02:27 PM)ov3r5y5t3m Totally dead ... after successfully passing the rom ... died ... recognizes only in USB ...
Yes ... I also tried to remove the battery ...

Whatever you do, DO NOT  format or select firmware upgrade in SP flash tool.
1. Have you tried flashing a different firmware?
2. The battery might be drained. Try connecting to charger while holding the power button
This post was last modified: 31-10-2018, 04:55 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
31-10-2018, 06:52 PM
#7
You were not clear about which firmware you flashed. You have to try another firmware.
ov3r5y5t3m
ov3r5y5t3m
ov3r5y5t3m
Enthusiastic Member
6
31-10-2018, 07:48 PM
#8
(31-10-2018, 04:53 PM)hovatek
(31-10-2018, 02:27 PM)ov3r5y5t3m Totally dead ... after successfully passing the rom ... died ... recognizes only in USB ...
Yes ... I also tried to remove the battery ...

Whatever you do, DO NOT  format or select firmware upgrade in SP flash tool.
1. Have you tried flashing a different firmware?
2. The battery might be drained. Try connecting to charger while holding the power button

Yes ... I already tried to use a different one, a version previous to this one that I said is his last: (NICKLAUS_NMA26.42-82_subsidy-UNLOCKED_model_CFC_SVC.xml)

And the battery is okay yes ... fully charged in the external charger.
ov3r5y5t3m
ov3r5y5t3m
ov3r5y5t3m
Enthusiastic Member
6
31-10-2018, 07:49 PM
#9
(31-10-2018, 06:52 PM)EMMANUS You were not clear about which firmware you flashed. You have to try another firmware.

The firmware I used was this: (NICKLAUS_RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC.xml)
X3non
X3non
X3non
Recognized Contributor
22,062
01-11-2018, 09:29 AM
#10



(31-10-2018, 07:49 PM)ov3r5y5t3m The firmware I used was this: (NICKLAUS_RETAIL_NMA26.42_11_3_subsidy_UNLOCKED_model_LATAMDS_CFC.xml)

have you ever successfully flashed this particular firmware to this phone and it worked fine? or this is the first time of flashing this firmware?
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram