Hovatek Forum MOBILE Android [Please help] How to fix TECNO Spark 2 KA7 Totally dead?
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] How to fix TECNO Spark 2 KA7 Totally dead?

[Please help] How to fix TECNO Spark 2 KA7 Totally dead?

xerxes
xerxes
xerxes
Senior Member
8,355
20-03-2019, 06:07 PM
#1



My TECNO Spark 2 KA7 is totally dead last tuesday when i tried to fix the sms not sented and deleted from the phone i uses other phone dumped firmware with build number 193 when it says brom error on sp flash tool i unlocked the bootloader via adb and flashed but it is the same and i tried to flash the whole ROM it with adb then i flased all the phones partition but system.img and userdata.img unable to flash but when i tried to reboot it is totally dead showing only the led lightened up when i pluged it to charge then i got it to carlcare but the sayed to me that the phones board is disqualified or not work more over.


Please help me! Does flashing the ROM via adb damaged the PCB Board of the phone or Norway



Sent from my TECNO CX Air using Tapatalk
SachinBorkar
SachinBorkar
SachinBorkar
Senior Member
218
20-03-2019, 06:11 PM
#2
(20-03-2019, 06:07 PM)Mikesew My TECNO Spark 2 KA7 is totally dead last tuesday when i tried to fix the sms not sented and deleted from the phone i uses other phone dumped firmware with build number 193 when it says brom error on sp flash tool i unlocked the bootloader via adb and flashed but it is the same and i tried to flash the whole ROM it with adb then i flased all the phones partition but system.img and userdata.img unable to flash but when i tried to reboot it is totally dead showing only the led lightened up when i pluged it to charge then i got it to carlcare but the sayed to me that the phones board is disqualified or not work more over.


Please help me! Does flashing the ROM via adb damaged the PCB Board of the phone or Norway



Sent from my TECNO CX Air using Tapatalk
Have you tried to flash it via miracle box or any other tool that specifically for your device.

If it detects to PC then it can be repairable.

Flashing via adb does not harm your motherboard.



Sent from my Titanium Vista 4G using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
21-03-2019, 09:29 AM
#3
(20-03-2019, 06:07 PM)Mikesew ...
Please help me! Does flashing the ROM via adb damaged the PCB Board of the phone or Norway

Sent from my TECNO CX Air using Tapatalk

can you remember the original build number of the phone?
what's the full build number of the firmware you flashed using adb?
what is the ram size of your phone?
xerxes
xerxes
xerxes
Senior Member
8,355
23-03-2019, 01:09 PM
#4
TECNO SPARK 2 OREO GO EDITION BUILD NUMBER..........V173

RAM 1GB

Sent from my TECNO CX Air using Tapatalk
xerxes
xerxes
xerxes
Senior Member
8,355
23-03-2019, 01:10 PM
#5



I tried also miraclebox 2.82 thunder but saying boot error

Sent from my TECNO CX Air using Tapatalk
X3non
X3non
X3non
Recognized Contributor
22,062
23-03-2019, 03:20 PM
#6
(23-03-2019, 01:09 PM)Mikesew TECNO SPARK 2 OREO GO EDITION BUILD NUMBER..........V173

RAM 1GB

Sent from my TECNO CX Air using Tapatalk

disconnect / reconnect the battery of the phone (loosen the back if you must), if the phone doesn't power on afterwards
download the right firmware for your build @ https://www.hovatek.com/forum/thread-24299.html
DA for your model @ https://www.hovatek.com/forum/thread-23243.html
then flash using SP flash tool
xerxes
xerxes
xerxes
Senior Member
8,355
26-03-2019, 01:35 AM
#7
Ok Thanks sir the problem is now fixed!



Thanks a lot

Sent from my TECNO CX Air using Tapatalk
dotcom024
dotcom024
dotcom024
Techie Member
40
07-12-2019, 10:51 PM
#8
please, I did remove the battery but still can't flash it. please need your help.
This post was last modified: 07-12-2019, 10:52 PM by dotcom024.
Attached Files
.png
Screenshot (5).png
Size: 120.88 KB / Downloads: 13
xerxes
xerxes
xerxes
Senior Member
8,355
08-12-2019, 12:37 AM
#9
(07-12-2019, 10:51 PM)dotcom024 please, I did remove the battery but still can't flash it. please need your help.

Please create a new thread, this is someone else’s support thread.
Go to https://www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram