Hovatek Forum MOBILE Android Tecno pouvoir 2 not connecting to Sp flash tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno pouvoir 2 not connecting to Sp flash tool

Tecno pouvoir 2 not connecting to Sp flash tool

okolimark
okolimark
okolimark
Experienced Member
93
04-05-2019, 07:30 AM
#1



I want to backup my tecno pouvoir 2 rom before rooting. I saw a guide on Hovatek which I religiously followed. I have installed all the necessary vcom USB drivers. I have a problem in the readback stage. When I connect my device, its makes connection sound and disconnects immediately then its starts charging or the phone will turn on. Sometimes it'll bring error 0xc0060001 or 0xc0060003. I have tried may fixes but non worked for me. Pls help. I want to root and backup my tecno pouvoir 2.

Sent from my TECNO LA7 using Hovatek Mobile
This post was last modified: 04-05-2019, 07:35 AM by okolimark.
X3non
X3non
X3non
Recognized Contributor
22,062
04-05-2019, 10:51 AM
#2
(04-05-2019, 07:30 AM)okolimark I want to backup my tecno pouvoir 2 rom before rooting. I saw a guide on Hovatek which I religiously followed. I have installed all the necessary vcom USB drivers. I have a problem in the readback stage. When I connect my device, its makes connection sound and disconnects immediately then its starts charging or the phone will turn on. Sometimes it'll bring error 0xc0060001 or 0xc0060003. I have tried may fixes but non worked for me. Pls help. I want to root and backup my tecno pouvoir 2.

Sent from my TECNO LA7 using Hovatek Mobile

when reading back in SP flash tool, did you use the DA file for your phone model? ; check the list @ https://www.hovatek.com/forum/thread-23243.html
okolimark
okolimark
okolimark
Experienced Member
93
04-05-2019, 12:11 PM
#3
I downloaded the DA file for my phone model, replaced the default DA with it, but it didn't solve the problem. It makes a connection sound, then another one and starts charging. After a while error 0xc0060001 pops out.

Sent from my TECNO LA7 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
04-05-2019, 02:32 PM
#4
(04-05-2019, 12:11 PM)okolimark I downloaded the DA file for my phone model, replaced the default DA with it, but it didn't solve the problem. It makes a connection sound, then another one and starts charging. After a while error 0xc0060001 pops out.

Sent from my TECNO LA7 using Hovatek Mobile

Did you properly install VCOM drivers? https://www.hovatek.com/forum/thread-440.html
On what version of Windows are you running SP Flash tool?
Try holding the vol down key before connecting to pc.
okolimark
okolimark
okolimark
Experienced Member
93
04-05-2019, 06:20 PM
#5



I installed vcom properly following the instructions from Hovatek. I'm running windows 10. I have tried holding down vol button, it takes me to Fastboot.. Vol up give another kinda error.

Sent from my TECNO LA7 using Hovatek Mobile
okolimark
okolimark
okolimark
Experienced Member
93
05-05-2019, 03:40 PM
#6
The fault was from my laptop. I used another laptop and it worked well.
Thanks for your assistance.

Sent from my TECNO LA7 using Hovatek Mobile
obiremponsolutions
obiremponsolutions
obiremponsolutions
Enthusiastic Member
5
21-07-2019, 05:28 AM
#7
Do not hold any keys
Just connect it to the pc
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram