Hovatek Forum MOBILE Android [Please help] How to change imei for RDA8859 chip Lamchin Kid watch?
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] How to change imei for RDA8859 chip Lamchin Kid watch?

[Please help] How to change imei for RDA8859 chip Lamchin Kid watch?

DVi
DVi
DVi
Newbie
4
30-10-2019, 10:34 PM
#1



Hi all,
I've bought a kid watch from Aliexpress (http://www.aliexpress.com/snapshot/0.htm...2981101321)
But I couldn't find a way to change its imei number.
I've found some drivers for SCI Modem&Com drivers (seen as Coolsand but drivers were not working). I can connect to COM28 and it says continuously some texts such as: 
gprs_delay_time=5.gprs_creater_count=3,is_gprs_attached=0,gsm:0,sim:0,signal:100,power_on_count:35
I've also try to Spreadtrum imei set tools (WriteIMEI v17) but failed..
Is there any way to change its imei with magic codes or any tool?
Thanks..
This post was last modified: 30-10-2019, 10:38 PM by DVi.
xerxes
xerxes
xerxes
Senior Member
8,355
31-10-2019, 06:57 AM
#2
(30-10-2019, 10:34 PM)DVi Hi all,
I've bought a kid watch from Aliexpress (http://www.aliexpress.com/snapshot/0.htm...2981101321)
But I couldn't find a way to change its imei number.
I've found some drivers for SCI Modem&Com drivers (seen as Coolsand but drivers were not working). I can connect to COM28 and it says continuously some texts such as: 
gprs_delay_time=5.gprs_creater_count=3,is_gprs_attached=0,gsm:0,sim:0,signal:100,power_on_count:35
I've also try to Spreadtrum imei set tools (WriteIMEI v17) but failed..
Is there any way to change its imei with magic codes or any tool?
Thanks..

Is there anything wrong with the watch?
What is wrong with watch’s current IMEI?
DVi
DVi
DVi
Newbie
4
01-11-2019, 07:16 PM
#3
(31-10-2019, 06:57 AM)babaJ5
(30-10-2019, 10:34 PM)DVi Hi all,
I've bought a kid watch from Aliexpress (http://www.aliexpress.com/snapshot/0.htm...2981101321)
But I couldn't find a way to change its imei number.
I've found some drivers for SCI Modem&Com drivers (seen as Coolsand but drivers were not working). I can connect to COM28 and it says continuously some texts such as: 
gprs_delay_time=5.gprs_creater_count=3,is_gprs_attached=0,gsm:0,sim:0,signal:100,power_on_count:35
I've also try to Spreadtrum imei set tools (WriteIMEI v17) but failed..
Is there any way to change its imei with magic codes or any tool?
Thanks..

Is there anything wrong with the watch?
What is wrong with watch’s current IMEI?
In my country, I have to register it to use a SIM card..
But the watch's cost is 15$, registration cost is 250$ :) 
So, I'd like to change it with my unused old phone..
freshtyt
freshtyt
freshtyt
Senior Member
2,949
02-11-2019, 10:33 AM
#4
(01-11-2019, 07:16 PM)DVi In my country, I have to register it to use a SIM card..
But the watch's cost is 15$, registration cost is 250$ Smile 
So, I'd like to change it with my unused old phone..

you can try this tool @ https://androiddatahost.com/u2zzk
but if it doesn't work then you will have to look for a hardware box / dongle with support for writing imei on your chipset type
DVi
DVi
DVi
Newbie
4
02-11-2019, 07:36 PM
#5



(02-11-2019, 10:33 AM)freshtyt
(01-11-2019, 07:16 PM)DVi In my country, I have to register it to use a SIM card..
But the watch's cost is 15$, registration cost is 250$ :) 
So, I'd like to change it with my unused old phone..

you can try this tool @ https://androiddatahost.com/u2zzk
but if it doesn't work then you will have to look for a hardware box / dongle with support for writing imei on your chipset type
Thank you, I've tried this tool, v1.0.0.6 and also 1.0.0.3.. These are not detect watch (maybe the driver problem)..
Hmm, Maybe I have to ask to phone repair shop for it..
freshtyt
freshtyt
freshtyt
Senior Member
2,949
02-11-2019, 09:25 PM
#6
(02-11-2019, 07:36 PM)DVi Thank you, I've tried this tool, v1.0.0.6 and also 1.0.0.3.. These are not detect watch (maybe the driver problem)..
Hmm, Maybe I have to ask to phone repair shop for it..

rda driver @ http://dl1.infinity-box.com/00/index-1.p...s_v1.01.7z
launch device manager on the PC to confirm that the device is detected properly
DVi
DVi
DVi
Newbie
4
03-11-2019, 09:36 AM
#7
(02-11-2019, 09:25 PM)freshtyt
(02-11-2019, 07:36 PM)DVi Thank you, I've tried this tool, v1.0.0.6 and also 1.0.0.3.. These are not detect watch (maybe the driver problem)..
Hmm, Maybe I have to ask to phone repair shop for it..

rda driver @ http://dl1.infinity-box.com/00/index-1.p...s_v1.01.7z
launch device manager on the PC to confirm that the device is detected properly
Yes, I've found that one too.. And when I connect watch, there are 2 devices appear: a Modem and COM28 serial port.. I can connect to COM28 and there are continuously messages looping.. I tried some AT commands but not worked.. Maybe the codes are not compatible for this watch.. And, If I power off the watch, there's only one device remain: RDA bridge, but utilities don't detect it..

I've also try to install Infinitybox and Miraclebox utilities but I think these ones require some external devices to work..
freshtyt
freshtyt
freshtyt
Senior Member
2,949
04-11-2019, 02:08 AM
#8
(03-11-2019, 09:36 AM)DVi Yes, I've found that one too.. And when I connect watch, there are 2 devices appear: a Modem and COM28 serial port.. I can connect to COM28 and there are continuously messages looping.. I tried some AT commands but not worked.. Maybe the codes are not compatible for this watch.. And, If I power off the watch, there's only one device remain: RDA bridge, but utilities don't detect it..

I've also try to install Infinitybox and Miraclebox utilities but I think these ones require some external devices to work..

so its not driver problem, rather the tool that'll support writing imei on the chipset of the device
yes, cm2 and miracle box both require a dongle but your chipset RDA8859 isnt supported by cm2. for miracle, you can try checking with their support team if your chipset is supported
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram