Hovatek Forum DEVELOPMENT Android TWRP Xiaomi Qin2
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


TWRP Xiaomi Qin2

TWRP Xiaomi Qin2

Testernnov
Testernnov
Testernnov
Newbie
4
27-04-2020, 09:49 AM
#1



Need TWRP for Xiaomi Qin 2, SC9832e Android 9 Go Unlocked. Try use "twrp porter (spreadtrum)", but phone hang on boot into ported recovery (vbmeta modded , recovery signed with my own key) stock_recovery[url=https://drive.google.com/file/d/1wM04iCIsmjuIdV1bCTPsoVw4At8tvyLL/view?usp=sharing][/url]
X3non
X3non
X3non
Recognized Contributor
22,062
28-04-2020, 12:46 PM
#2
(27-04-2020, 09:49 AM)Testernnov Need TWRP for Xiaomi Qin 2, SC9832e Android 9 Go Unlocked. Try use "twrp porter (spreadtrum)", but phone hang on boot into ported recovery (vbmeta modded , recovery signed with my own key) stock_recovery[url=https://drive.google.com/file/d/1wM04iCIsmjuIdV1bCTPsoVw4At8tvyLL/view?usp=sharing][/url]

your device is rooted right? remove recovery-from-boot.p file from within /system partition on your device then retry flashing and booting the twrp from the porter tool and post the result
Testernnov
Testernnov
Testernnov
Newbie
4
30-04-2020, 12:00 PM
#3
since i installed phh gsi 10 (recovery-from-boot in /system not exist), ported twrp still hang on boot.
X3non
X3non
X3non
Recognized Contributor
22,062
30-04-2020, 06:37 PM
#4
(30-04-2020, 12:00 PM)Testernnov since i installed phh gsi 10 (recovery-from-boot in /system not exist), ported twrp still hang on boot.

try the twrps @ https://mega.nz/file/CDpEmCxA#EtOyta7JC_...kLT2vSwJXo
Testernnov
Testernnov
Testernnov
Newbie
4
01-05-2020, 07:56 AM
#5



(30-04-2020, 06:37 PM)X3non
(30-04-2020, 12:00 PM)Testernnov since i installed phh gsi 10 (recovery-from-boot in /system not exist), ported twrp still hang on boot.

try the twrps @ https://mega.nz/file/CDpEmCxA#EtOyta7JC_...kLT2vSwJXo
Great job.
Many thanks.
TWRP 3.3.1 for Qin2 (second) successfully booted.
A few questions:
1. no adb
2. After backup /system partition and restore, phone does not load completely, it remains at the animation stage. As a solution: exec "setenforce 0" through adb while booting android.(SELinux issue? ) logcat attached.
What do you recommend?
Attached Files
.7z
Qin2_logcat.log.7z
Size: 25.61 KB / Downloads: 2
X3non
X3non
X3non
Recognized Contributor
22,062
01-05-2020, 03:13 PM
#6
(01-05-2020, 07:56 AM)Testernnov Great job.
Many thanks.
TWRP 3.3.1 for Qin2 (second) successfully booted.
A few questions:
1. no adb
2. After backup /system partition and restore, phone does not load completely, it remains at the animation stage. As a solution: exec "setenforce 0" through adb while booting android.(SELinux issue? ) logcat attached.
What do you recommend?

interesting, cause i thought that's the same twrp from the porting tool (maybe i mixed them up)
1. i thought i enabled adb but you can try the guide @ https://www.hovatek.com/forum/thread-32715.html
2. maybe its from the mount points and i'm not sure what /system partition is mounted as on your device, but when you unpack recovery, you can check or try changing the line for system in /ramdisk/etc/recovery.fstab to either one of these

Code:

/system_root            ext4  /dev/block/platform/soc/soc:ap-ahb/20600000.sdio/by-name/system                flags=display="system";backup=1;flashimg=1     

OR

/            ext4  /dev/block/platform/soc/soc:ap-ahb/20600000.sdio/by-name/system                flags=display="system";backup=1;flashimg=1     
This post was last modified: 01-05-2020, 03:20 PM by X3non.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram