Hovatek Forum HARDWARE SIM / Network unlock Huawei E8372H-153 lost WEBUI after unlock
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Huawei E8372H-153 lost WEBUI after unlock

Huawei E8372H-153 lost WEBUI after unlock

nadjtech
nadjtech
nadjtech
Junior Member
28
25-06-2020, 06:12 PM
#1



Hi there!
I have a wingle E8372h-153 that lost WEBUI after unlock.
here are all the informations of it:
Found Applications port COM5

Found modem        : E8372
Model              : Huawei E8372h
IMEI                : 000000000000000
Serial NR.          : 0123456789ABCDEF
Firmware            : .21.321.01.00.306
Compile date / time : Mar  1 2017 14:03:47
Hardware ver.      : CL1E8372HM
Dashboard version  : 00.00.00.000.00
SIM Lock status    : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

As you see, it's version 21.321.01.00.306
so I've tried to reflash with usbloader.bin but it doesn't work. I've tried to downgrade the firmware and flash with an other one that will have a WEBUI but all versions under 21.321 fail.
do you guys have a solution?
can you help me please?
freshtyt
freshtyt
freshtyt
Senior Member
2,949
26-06-2020, 10:22 AM
#2
(25-06-2020, 06:12 PM)nadjtech Hi there!
I have a wingle E8372h-153 that lost WEBUI after unlock.
here are all the informations of it:
Found Applications port COM5

Found modem        : E8372
Model              : Huawei E8372h
IMEI                : 000000000000000
Serial NR.          : 0123456789ABCDEF
Firmware            : .21.321.01.00.306
Compile date / time : Mar  1 2017 14:03:47
Hardware ver.      : CL1E8372HM
Dashboard version  : 00.00.00.000.00
SIM Lock status    : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

As you see, it's version 21.321.01.00.306
so I've tried to reflash with usbloader.bin but it doesn't work. I've tried to downgrade the firmware and flash with an other one that will have a WEBUI but all versions under 21.321 fail.
do you guys have a solution?
can you help me please?

what do you mean doesn't work when you flash usbloader?
have you tried flashing usblsafe? download @ http://www.mediafire.com/file/9cx7k95a4w...h.rar/file

if usblsafe go through, you can try the firmware @ http://www.mediafire.com/file/jg7ggy628b...0.rar/file
webui @ http://www.mediafire.com/file/8lcs9bjlyb...1.zip/file
nadjtech
nadjtech
nadjtech
Junior Member
28
26-06-2020, 10:40 AM
#3
It worked once when I was unlocking it.
I used [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] to erase firmware, then I flashed this firmware version [NEGATIVE SQUARED LATIN CAPITAL LETTER B]21.321.XX.XX[/B].
The modem is now unlockee but since then I'm unable to flash neither [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] nor [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbsafe.bin[/B].
I have no WEBUI, the dashboard is 00.00.00.00
And when If try to flash [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] or [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbsafe.bin[/B] in order to install an other firmware, I get  some weird stuffs in the command [NEGATIVE SQUARED LATIN CAPITAL LETTER B]balong_usbdloader[/B] that I cannot even read since they were supposed to be displayed in Russian.
I can boot the Modem into [NEGATIVE SQUARED LATIN CAPITAL LETTER B]USBSAFE[/B] mode with command [NEGATIVE SQUARED LATIN CAPITAL LETTER B]AT^GODLOAD[/B] in [NEGATIVE SQUARED LATIN CAPITAL LETTER B]DC-UNLOCKER[/B]. but any firmware lower than the version that is in it now (21.321...) fail with [NEGATIVE SQUARED LATIN CAPITAL LETTER B]error code 13[/B].


Sent from my SM-G930F using Hovatek Mobile
nadjtech
nadjtech
nadjtech
Junior Member
28
26-06-2020, 12:01 PM
#4
Hi, I've downloaded the WEBUI you provided by the way.
It started updating...it loaded untill the middle then failed with error code 19 this time.

Sent from my SM-G930F using Hovatek Mobile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
27-06-2020, 09:19 AM
#5



(26-06-2020, 10:40 AM)nadjtech It worked once when I was unlocking it.
I used [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] to erase firmware, then I flashed this firmware version [NEGATIVE SQUARED LATIN CAPITAL LETTER B]21.321.XX.XX[/B].
The modem is now unlockee but since then I'm unable to flash neither [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] nor [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbsafe.bin[/B].
I have no WEBUI, the dashboard is 00.00.00.00
And when If try to flash [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbloader.bin[/B] or [NEGATIVE SQUARED LATIN CAPITAL LETTER B]usbsafe.bin[/B] in order to install an other firmware, I get  some weird stuffs in the command [NEGATIVE SQUARED LATIN CAPITAL LETTER B]balong_usbdloader[/B] that I cannot even read since they were supposed to be displayed in Russian.
I can boot the Modem into [NEGATIVE SQUARED LATIN CAPITAL LETTER B]USBSAFE[/B] mode with command [NEGATIVE SQUARED LATIN CAPITAL LETTER B]AT^GODLOAD[/B] in [NEGATIVE SQUARED LATIN CAPITAL LETTER B]DC-UNLOCKER[/B]. but any firmware lower than the version that is in it now (21.321...) fail with [NEGATIVE SQUARED LATIN CAPITAL LETTER B]error code 13[/B].


Sent from my SM-G930F using Hovatek Mobile

you could try copying the error and translate using google translate
did you try flashing the 21.328 firmware?
nadjtech
nadjtech
nadjtech
Junior Member
28
30-06-2020, 06:43 AM
#6
Hi, it's okey.
I just flashed a universal WEBUI, and it worked 😉!
Thanks!

Sent from my SM-G930F using Hovatek Mobile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
30-06-2020, 10:33 AM
#7
(30-06-2020, 06:43 AM)nadjtech Hi, it's okey.
I just flashed a universal WEBUI, and it worked ?!
Thanks!

Sent from my SM-G930F using Hovatek Mobile

a different webui or the one i shared?
ZaKiyy
ZaKiyy
ZaKiyy
Newbie
4
08-10-2020, 01:52 PM
#8
(30-06-2020, 06:43 AM)nadjtech Hi, it's okey.
I just flashed a universal WEBUI, and it worked ?!
Thanks!

Hello,please share the WEBUI you have been using please !!
ZaKiyy
ZaKiyy
ZaKiyy
Newbie
4
08-10-2020, 06:25 PM
#9
(30-06-2020, 06:43 AM)nadjtech Hi, it's okey.
I just flashed a universal WEBUI, and it worked ?!
Thanks!

Sent from my SM-G930F using Hovatek Mobile

Please Share the flash file you have been using !!
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram