Hovatek Forum MOBILE Android How to fix an MTK Android phone which goes totally dead during SP Flash Tool ReadBack
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


How to fix an MTK Android phone which goes totally dead during SP Flash Tool ReadBack

How to fix an MTK Android phone which goes totally dead during SP Flash Tool ReadBack

hovatek
hovatek
hovatek
Administrator
49,570
23-09-2014, 06:39 PM
#1



If your MTK Android (e.g Tecno, Gionee, Infinix, Innjoo, Opsson, Micromax etc) phone goes totally dead while trying to flash files to it using SP flash tool or other software then follow this guide on how to fix a totally dead MTK Android phone; wont come on, charge or show any sign of life  to resolve it. If on the other hand, it goes totally dead during an interrupted SP Flash Tool Read Back (see how to make a ROM backup / Dump using Sp Flash Tool Read Back ) process then you don't need to panic. The phone would usually still make a sound when connected to PC but wont respond to power button or show any charging sign when connected to a power source.
 To fix this, all you need to do is try either of the following:
1. Hold down the power button for 30 seconds then try booting the phone normally
2. Leave it connected to a power source for a few hours. The phone should then show the charging sign (if not fully charged) and then be able to boot up again. 

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram