to solve bootloop problem, after flashing recovery.img, assuming you dont have access to recovery or bootloader screen
1.download the stock firmware for your device @ https://www.hovatek.com/forum/thread-20228.html
2.unpack the stock rom
3.download the attached mt67xxxx drivers @ https://www.hovatek.com/forum/thread-16640.html
(((((To install these drivers 1.go to settings>update and security>recovery>advance startup>advanced option>change startup behaviour>disable driver signing
2.go to device manager>add legacy hardware>next through the options>have disk>manually install the listed drivers
3.dont worry about windows telling you, it may not work))))
if you can't make those drivers work then Enable Windows testsigning On by typing the following command in CMD as ADMIN
bcdedit /set testsigning on
4.download Tecno_Flash_Tool_v4.1901.23.17 @ https://www.hovatek.com/forum/thread-23708.html ((dont bother working in SP FLASHING TOOL )))))
5.load your scatter-file from the unpacked stock firmware
6.connect ur phone
7. start the process
after finishing dont worry about the orange state dialog at the start, its just a warning for unlocked bootloader or remove it using the guide @ https://www.hovatek.com/forum/thread-24385.html
hope this helps:p
This post was last modified: 06-02-2020, 06:19 PM by ghostofarma.