Bluboo S1 Baseband (MT6757P) unknown
Bluboo S1 Baseband (MT6757P) unknown
(24-03-2018, 03:45 PM)X3non(23-03-2018, 05:30 PM)ManiacB Hi! Here is the screenshot.
verify if the second device has secro partition using this same method
if the second device has secro partition then install adb on your PC @ https://www.hovatek.com/forum/thread-588.html and try backup and restore using adb dd
Backup from the working phone
Code:adb shell
su
dd if=/yourMountingPoint of=/yourDestination/partitionType
e.g
dd if=/dev/block/mmcblk0p12 of=/sdcard/secro.img
Restore to broken phone
Code:adb shell
su
dd if=/yourDestination/partitionType of=/yourMountingPoint
e.g
dd if=/sdcard/secro.img of=/dev/block/mmcblk0p12
lets know the outcome
On the working phone is no secro but a sec1 partition (see picture). I have copied the sec1 from working phone to broken one.
After a reboot nothing changes....still baseband unknown