This is a step by step guide on how to perform RAM test on a Mediatek device. RAM test allows us to properly verify the memory storage, type and RAM on external storage along with other important info.
Scatter file and Preloader.bin for your phone [place the two files in the same folder location]
Steps on How to perform RAM test on a Mediatek Android Phone using SP flash tool
Follow the steps below to perform a RAM test on a Mediatek [MTK] android phone
Launch SP flash tool
Click on choose scatter file at the right hand side
Navigate to the location of your scatter file and select it.
On the list of items that appear, only PRELOADER should have a file location
Click on "Memory Test" tab
Untick all the check-boxes and tick ONLY "RAM test"
Click on Start, switch off your phone and connect it to the PC using a USB cord
Wait till you get a Success message (green tick with OK) and do not interrupt. Close the green tick windows.
You can collect the info you need from the result of the RAM test window
Important Notice
DO NOT attempt to do a "DRAM flip test" in place of "RAM test". DRAM flip test is a different test and it takes a pretty long time to complete and could damage your phone's emmc chip especially if its already very weak
If you're trying to obtain full length address and you don't see RAM test after selecting your scatter file, then use this method to obtain full length address
This post was last modified: 04-10-2019, 11:03 PM by X3non.