Hovatek Forum HARDWARE Boxes and Dongles [Tutorial] How to use Infinity CM2 to bypass MTK smartwatch lock code
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Tutorial] How to use Infinity CM2 to bypass MTK smartwatch lock code

[Tutorial] How to use Infinity CM2 to bypass MTK smartwatch lock code

X3non
X3non
X3non
Recognized Contributor
22,062
09-06-2018, 12:40 AM
#1



This guide will explain how to read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II (CM2) MTK.

Requirements


Steps to read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II MTKĀ (CM2MTK) module


The steps below explain how to write read or reset the unlock code of a Mediatek (MTK) Smart Watch using Infinity Chinese Miracle II MTKĀ (CM2MTK) module

  1. Launch CM2MTK

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-1.jpg]

  2. Select the device's chipset under Settings > CPU (most smart watches usually use NOR / NAND memory but be sure to verify yours)

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-2.jpg]

  3. Click the UserData / Forensic tab

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-3.jpg]

  4. Tick the checkbox beside Read (if you want to remove the lock code entirely then do NOT tick the checkbox beside Read)

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-4.jpg]

  5. Click "Read User Codes" (if you didn't tick the check box beside Read then the button will be "Reset User Codes")

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-5.jpg]

  6. Once the tool shows Wait for phone..., power off the smart watch (with battery inserted and not holding any button) and connect to the PC via a USB cord
  7. The device should get detected, do not interrupt the process
  8. You should get a done message once the lock code has been found

    [Image: How-to-Read-Reset-Unlock-Code-of-a-Media...-MTK-6.jpg]

  9. Disconnect the device and power up to confirm


Important Notice
  • Infinity Chinese Miracle II MTK requires a hardware dongle to work
  • If you've chosen to use a loader version (dongle not required) and get a warning from your antivirus, you are entirely responsible for choosing to let the loader run
  • Ensure to run the latest version of the module as it would support more chipsets
This post was last modified: 04-10-2019, 10:35 PM by X3non.

Messages In This Thread
How to use Infinity CM2 to bypass MTK smartwatch lock code - by X3non - 09-06-2018, 12:40 AM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram