[Tutorial] How to flash firmware using Infinix Flash Tool
[Tutorial] How to flash firmware using Infinix Flash Tool
(08-10-2015, 09:11 PM)hovatek Requirementsthankyou so much this is greeeeeeaaaaaatt!!!!
* PC
* Phone
* Download Infinix Flash Tool @ https://docs.google.com/uc?id=0B9srKhKuV...t=download
* Download the Stock ROM for your phone model @ https://www.hovatek.com/forum/thread-533.html
* Install VCOM drivers on the PC using https://www.hovatek.com/forum/thread-440.html
See the video tutorial below or @ http://youtu.be/wIjc4_gcFSM
Procedure
1. Extract Infinix Flash tool and the stock ROM you wish to flash
2. Run Infinix Flash tool as Administrator
3. You should now see the tool's Dashboard
4. Click Brower (with a folder icon)
5. In the window that pops up, navigate to the stock ROM folder, select the scatter file and click Open
6. The file path should now appear in front of Infinix-bin-loading File
7. Click Start
8. Start should now be grayed out and Stop green in color
9. Switch off the phone and connect it to the PC via USB cord (with battery inside); flashing should begin
* Note: Do not interrupt flashing. If you accidentally do and the phone goes dead then follow the guide @ https://www.hovatek.com/forum/thread-808.html
10. You should get a green OK prompt once flashing is completed
11. Disconnect the phone then boot it. If the phone gets stuck at logo (and you flashed the correct ROM) then removed the battery and slot it back in. If the battery is inbuilt then do a factory reset in recovery mode.