[Development] How to unlock the Bootloader of Tecno Camon C9 (Pro)
[Development] How to unlock the Bootloader of Tecno Camon C9 (Pro)
(31-07-2016, 08:33 AM)hovatek To successfully unlock the Bootloader of the Tecno Camon C9:
* Enable USB Debugging on the Tecno C9 (see https://www.hovatek.com/forum/thread-10109.html)
* Setup ADB and Fastboot on the PC (see https://www.hovatek.com/forum/thread-588.html)
* Connect the phone to the PC via USB cord (while On)
* Launch ADB
* In ADB, run the following command (press Enter after the command)
Code:adb devices
* ADB should detect the device. If ADB detects other devices but not the Tecno C9 then it must be an ADB clash, see https://www.hovatek.com/forum/thread-10111.html
* Once the device gets detected, boot it into Fastboot by running the following command (press Enter after the command)
Code:adb reboot-bootloader
* The phone should now enter Fastboot (black screen with only fastboot written at the top or bottom)
* In Fastboot, run the following command (press Enter after the command)
Code:fastboot oem unlock
* You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes
* You should now get a success message
* Reboot the device by running the command below (press Enter after the command)
Code:fastboot reboot
