POP1 F3 TECNO clone
POP1 F3 TECNO clone
(29-06-2019, 05:37 PM)X3nonyes i believe so because i do not even know were to find the clone.(29-06-2019, 01:41 PM)J2MS thank you for your support I will wait for the owner, also main while I will keep trying whatever I find online because so far have tried countless of them firmware and still non-works.
maybe you're trying firmwares for original f3 (which is what's readily available online) not clone f3
(29-06-2019, 05:59 PM)J2MS(29-06-2019, 05:37 PM)X3nonyes i believe so because i do not even know were to find the clone.(29-06-2019, 01:41 PM)J2MS thank you for your support I will wait for the owner, also main while I will keep trying whatever I find online because so far have tried countless of them firmware and still non-works.
maybe you're trying firmwares for original f3 (which is what's readily available online) not clone f3
(30-06-2019, 10:27 AM)innageeok, thank you very much...(29-06-2019, 05:59 PM)J2MS(29-06-2019, 05:37 PM)X3nonyes i believe so because i do not even know were to find the clone.(29-06-2019, 01:41 PM)J2MS thank you for your support I will wait for the owner, also main while I will keep trying whatever I find online because so far have tried countless of them firmware and still non-works.
maybe you're trying firmwares for original f3 (which is what's readily available online) not clone f3
You’ll need to look for a clone you can backup it’s firmware or keep waiting till the firmware is available online.
(18-06-2019, 10:38 PM)J2MS(18-06-2019, 05:34 PM)J2MSI tried an earlier version of spflash tool and am still getting the same message...(18-06-2019, 05:28 PM)innageeok am doing that now, also looking at the photos I sent of the board and the build number what exert firmware do you suggest I use because have also tried different versions of the pop1 f3 firmware(18-06-2019, 04:32 PM)J2MStry a different sp flash tool version, download @ https://www.hovatek.com/forum/thread-13970.html(18-06-2019, 09:50 AM)innagee The attached screenshot shows you didn't load DAyes that's the message I keep getting but I did load the DA file using spflash tool
Download @ https://www.hovatek.com/forum/thread-23243.html
Hello again guys...i found a firmware online for my f3pop1 that flashed the phone and it was ok but the issue is that am only getting a green screen display from been dead to now a green screen, question is there anything i can do that that scatter file that can help me fix the phone to work fully.
(02-07-2019, 06:47 PM)J2MS Hello again guys...i found a firmware online for my f3pop1 that flashed the phone and it was ok but the issue is that am only getting a green screen display from been dead to now a green screen, question is there anything i can do that that scatter file that can help me fix the phone to work fully.
(03-07-2019, 09:51 AM)X3nonok thank you...(02-07-2019, 06:47 PM)J2MS Hello again guys...i found a firmware online for my f3pop1 that flashed the phone and it was ok but the issue is that am only getting a green screen display from been dead to now a green screen, question is there anything i can do that that scatter file that can help me fix the phone to work fully.
the scatter file is not the problem, you need to find a compatible lk.bin
refer to https://www.hovatek.com/forum/thread-1667.html