Hovatek Forum MOBILE Android Dead spd china clone phone
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Dead spd china clone phone

Dead spd china clone phone

Pages (2): 1 2 Next
mbaziira
mbaziira
mbaziira
Senior Member
475
12-07-2020, 10:24 PM
#1



Guys i formated an huaxinda model FW5298 spd clone phone there after booting the phone apps where crashing so i tried to reflash back its firmware which i had backedup before formating the phone but unfortunately after write completed the phone went dead this is not the first time clone china phones going dead and what surprises me is that they go dead even after flashing their own backedup firmware i have tried to change the battery and charged still dead

Sent from my D5503 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
13-07-2020, 09:16 AM
#2
(12-07-2020, 10:24 PM)mbaziira Guys i formated an huaxinda model FW5298 spd clone phone there after booting the phone apps where crashing so i tried to reflash back its firmware which i had backedup before formating the phone but unfortunately after write completed the phone went dead this is not the first time clone china phones going dead and what surprises me is that they go dead even after flashing their own backedup firmware i have tried to change the battery and charged still dead

Sent from my D5503 using Hovatek Mobile

if you've removed / reinserted the battery after flashing and it's still dead then it's probably faulty emmc
you can try running a flash ic / emmc test using a tool such as cm2 to confirm this
mbaziira
mbaziira
mbaziira
Senior Member
475
13-07-2020, 12:30 PM
#3
(13-07-2020, 09:16 AM)X3non
(12-07-2020, 10:24 PM)mbaziira
Guys i formated an huaxinda model FW5298 spd clone phone there after booting the phone apps where crashing so i tried to reflash back its firmware which i had backedup before formating the phone  but unfortunately after write completed the phone went dead this is not the first time clone china phones going dead and what surprises me is that they go dead even after flashing their own backedup firmware i have tried to change the battery and charged still dead

Sent from my D5503 using Hovatek Mobile


if you've removed / reinserted the battery after flashing and it's still dead then it's probably faulty emmc
you can try running a flash ic / emmc test using a tool such as cm2 to confirm this

I can't get access to cm2 so no other way i can flash it again

Sent from my D5503 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
14-07-2020, 09:35 AM
#4
(13-07-2020, 12:30 PM)mbaziira I can't get access to cm2 so no other way i can flash it again

Sent from my D5503 using Hovatek Mobile

if the issue is caused by faulty backup, you can test this by attempting to unpack lets say boot or recovery.img from the backup using android image kitchen, if it unpacks without problems then backup is fine
if issue is caused by faulty emmc as suspected then no point flashing again. only replacing the emmc chip will suffice
hovatek
hovatek
hovatek
Administrator
49,566
14-07-2020, 01:55 PM
#5



(12-07-2020, 10:24 PM)mbaziira Guys i formated an huaxinda model FW5298 spd clone phone there after booting the phone apps where crashing so i tried to reflash back its firmware which i had backedup before formating the phone but unfortunately after write completed the phone went dead this is not the first time clone china phones going dead and what surprises me is that they go dead even after flashing their own backedup firmware i have tried to change the battery and charged still dead

Sent from my D5503 using Hovatek Mobile

Which tool did you use to backup and was it with hardware or loader?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
mbaziira
mbaziira
mbaziira
Senior Member
475
14-07-2020, 02:02 PM
#6
(14-07-2020, 01:55 PM)hovatek
(12-07-2020, 10:24 PM)mbaziira
Guys i formated an huaxinda model FW5298 spd clone phone there after booting the phone apps where crashing so i tried to reflash back its firmware which i had backedup before formating the phone  but unfortunately after write completed the phone went dead this is not the first time clone china phones going dead and what surprises me is that they go dead even after flashing their own backedup firmware i have tried to change the battery and charged still dead

Sent from my D5503 using Hovatek Mobile


Which tool did you use to backup and was it with hardware or loader?
No i used miracle box loader version but even this is not the first time this scenario happening backuping firmware of the same phone and reflashing and the phone goes dead


Sent from my D5503 using Hovatek Mobile
hovatek
hovatek
hovatek
Administrator
49,566
17-07-2020, 07:50 AM
#7
(14-07-2020, 02:02 PM)mbaziira No i used miracle box loader version but even this is not the first time this scenario happening backuping firmware of the same phone and reflashing and the phone goes dead


Sent from my D5503 using Hovatek Mobile

There are 2 things you should know:
1. Many newer Android devices tend to reject flashing backups, only official firmware
2. Miracle Thunder loader will backup in .bin format. I would much prefer backing up and flashing .pac format. Although .bin formats have saved the day on rare occasions, you're more likely to run into trouble with such a backup

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
mbaziira
mbaziira
mbaziira
Senior Member
475
19-07-2020, 12:24 PM
#8
(17-07-2020, 07:50 AM)hovatek
(14-07-2020, 02:02 PM)mbaziira
No i used miracle box loader version but even this is not the first time this scenario happening backuping firmware of the same phone and reflashing and the phone goes dead


Sent from my D5503 using Hovatek Mobile


There are 2 things you should know:
1. Many newer Android devices tend to reject flashing backups, only official firmware
2. Miracle Thunder loader will backup in .bin format. I would much prefer backing up and flashing .pac format. Although .bin formats have saved the day on rare occasions, you're more likely to run into trouble with such a backup

So is there anyway i can convert .bin to a pac file or how can i backup in pac format

Sent from my D5503 using Hovatek Mobile
This post was last modified: 19-07-2020, 09:42 PM by mbaziira.
X3non
X3non
X3non
Recognized Contributor
22,062
20-07-2020, 09:01 AM
#9
(19-07-2020, 12:24 PM)mbaziira So is there anyway i can convert .bin to a pac file

None


(19-07-2020, 12:24 PM)mbaziira or how can i backup in pac format

Sent from my D5503 using Hovatek Mobile

backup using cm2 and convert the backup pac.sc to pac using cm2
mbaziira
mbaziira
mbaziira
Senior Member
475
20-07-2020, 10:17 AM
#10



(20-07-2020, 09:01 AM)X3non
(19-07-2020, 12:24 PM)mbaziira
So is there anyway i can convert .bin to a pac file


None


(19-07-2020, 12:24 PM)mbaziira
or how can i backup in pac format

Sent from my D5503 using Hovatek Mobile


backup using cm2 and convert the backup pac.sc to pac using cm2
Ohh but i don't have access to cm2


Sent from my D5503 using Hovatek Mobile
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram