[Tutorial] How to use WiseLink Tool
[Tutorial] How to use WiseLink Tool
(13-03-2016, 04:16 PM)hovatek(12-03-2016, 11:51 PM)Tjaytony Pls update the link for WiseLink tool v5.7..
thanks for the feedback.
We've replaced the above link with that of V 5.5.
you could also try http://www.4shared.com/rar/v7vmxGfTba/wi..._tool.html
(16-07-2015, 11:47 AM)hovatek WiseLink Tool is similar to SP flash tool ( https://www.hovatek.com/forum/thread-159.html)This files is came from me hehehe
Requirement
* Download WiseLink Tool V 4.1 @ https://docs.google.com/uc?id=0B9srKhKuV...t=download or V 5.5 @ https://www.4shared.com/rar/Ub0qmN3Bce/W...55053.html
* Install VCOM drivers ( https://www.hovatek.com/forum/thread-440.html)
* PC
* USB Cord
* Phone to be flashed
* Firmware (it's usually in the format shown in the image below)
Note
If you get Error 1# during flashing then use Version 5.7
Procedure
* Install WiseLink Tool on your PC
* Run WiseLink Tool as Administrator
* In the Login box, click Open RegCode File
* Navigate to the location of the ZZZZZZZ.key file, select it and click Open
* Click OK
* You should now see the WiseLink Tool dashboard
* Click the Scatter-loading File button
* In the window that pops up, navigate to the firmware's folder and select the scatter file (its a .sca file)
* A list with ticked boxes should now appear in WiseLink Tool
* Click Download
* Connect the phone to the PC (while switched off with battery inside) and wait for flashing to be complete before disconnecting
(15-03-2016, 04:39 PM)lhandz This files is came from me hehehe
(13-04-2016, 09:06 PM)kellorico16 wheres the key :3 please give sir thanks