[Please help] INNJOO F2 SCREEN NOT WORKING AFTER FLASHING
[Please help] INNJOO F2 SCREEN NOT WORKING AFTER FLASHING
(30-11-2015, 11:35 AM)cherry1 I have an Innjoo F2 with unfortunate android system have stopped error.I hard reset the device but it didn't solve the problem.So I downloaded the rom from this site.I flashed it via sp flashtool successfully.It came up,but I discovered that the touch screen is no longer responding.Please help me.
(01-12-2015, 02:43 PM)cherry1 I have also tried the one that requires wiselink tool.That one hangs on Innjoo logo.I did a hard reset after flashing but it is still stuck on Innjoo logo.The other rom boots the tab but the touch screen is not working.
(02-12-2015, 02:37 PM)cherry1 Thanks for your prompt replies.I have tried to enter the emmc factory mode with the volume down and power keys without success.It can only go into recovery mode.I have wiped everything,but it is still hanging on innjoo logo.Any more suggestion?Thanks.
(04-12-2015, 10:20 AM)cherry1 The sp flashtool rom part 4 and 5 is corrupt.The system image did not extract.So I used the wiselink tool system rom after renaming the system to system.img.I did that after seeing a tutorial from this site on how to use the wiselink rom to work with sp flash tool.I tried flashing the innjoo with the wiselink tool but it was giving me an error code.Error 1# or something.Combining the system.img file from the wiselink rom and flashing it with the sp flash tool rom works but the touch screen is not working.Renaming the wiselink rom and flashing it via sp flashtool hangs on innjoo logo.I did a back up before the flashing.I have flashed the tab with the backup but it still hangs on the innjoo logo.I am now stuck.I don't know what else to do.
(04-12-2015, 01:19 PM)cherry1 It is still not going into emmc mode.Only recovery mode.