Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] SP flash tool not working

#1
(This post was last modified: 12-06-2015, 09:30 PM by ruonim. )

I cant flash my phone with sp flash tool. Full log in attechment.

Log is full off:

12/06/15 16:52:14.056 BROM_DLL[7220][7620]: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(57600), SEND(0xA0)->RECV(0xA0), fail_retry(1). (FlashToolLib/sv5/common/interface/src/brom_autoboot.cpp:265)

12/06/15 16:52:14.058 BROM_DLL[7220][7620]: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(9600),



Attached Files
.7z   SP_FT_Dump_12-06-2015-16-51-35.7z (Size: 93.59 KB / Downloads: 2)
Reply
#2
(This post was last modified: 12-06-2015, 10:39 PM by hovatek. )
(12-06-2015, 05:18 PM)ruonim Wrote: I cant flash my phone with sp flash tool. Full log in attechment.

Log is full off:

12/06/15 16:52:14.056 BROM_DLL[7220][7620]: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(57600), SEND(0xA0)->RECV(0xA0), fail_retry(1). (FlashToolLib/sv5/common/interface/src/brom_autoboot.cpp:265)

12/06/15 16:52:14.058 BROM_DLL[7220][7620]: BRom_AutoBoot::BRom_StartCmd(1): m_ext_clock(EXT_26M), m_baud_rate(9600),

what error message did SP flash tool give / pop up?
Reply
#3
No error. Phone stays in preloader after that. Download don't start.
Reply
#4
(12-07-2015, 06:10 AM)ruonim Wrote: No error. Phone stays in preloader after that. Download don't start.

Install VCOM drivers using  https://forum.hovatek.com/thread-440.html and retry
Reply
#5
Already did that before posting. If you look in logs flashtool checks phone - it passes then fail to send data.
Reply
#6
(This post was last modified: 12-07-2015, 12:42 PM by ruonim. )
Will try drivers from link in thread. But doubt will be any difference from sp tool site.
Reply
#7
Here you can see that driver is working. But flash tool not.

Attached Files
.png   preloader.png (Size: 31.45 KB / Downloads: 5)
Reply
#8
(This post was last modified: 12-07-2015, 03:20 PM by ruonim. )
Finally got it working - used different sp flash tool version.
Reply










Users browsing this thread:
1 Guest(s)