Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help flash twrp on tecno j5

#1

Hi there, i want to know. 
Is there no any other way to install/flash TWRP on tecno boom j5 without using pc? 
Am getting difficulty with the correct drivers to do this on pc

Sent from my TECNO-J5 using Hovatek mobile


Reply
#2
(12-13-2015, 08:57 PM)jossy Wrote: Hi there, i want to know. 
Is there no any other way to install/flash TWRP on tecno boom j5 without using pc? 
Am getting difficulty with the correct drivers to do this on pc

Sent from my TECNO-J5 using Hovatek mobile

I believe you're trying to root. if Yes, the answer is No.
install vcom drivers using https://forum.hovatek.com/thread-440.html and follow the J5 rooting guide @ https://forum.hovatek.com/thread-1.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
I'm getting DRAM error help me
Reply
#4
(This post was last modified: 01-19-2016, 09:46 AM by vinay1230012. )
Step 1: First download the recovery zip file from here, and then extract the “Recovery.img” and “MT6580_Android_Scatter.txt” file to the desktop screen of your computer or create a folder and extract to it, as seen in the image below. Step 2: Now, power off your device, and remove the battery if possible. Step 3: Next, download the SP Flash tool, and extract the files to your computer. You should get the following files as seen below, after extraction. Step 4: From the extracted files, open Flash_tool.exe Step 5: Once the flash tool is launched, then click on the download/upgrade tab and click on scatter loading button Step 6: Now, locate the “MT6580_Android_Scatter.txt” file, which is on your desktop. Step 7: After that, click download to begin flashing process. Step 8: Immediately, connect your device (without battery if possible) to your computer via USB cable, and press Volume Down or up key, so it would be detected easily by your computer. Step 9: The Flashing process would be in progress, and a Green button would appear once the process is completed. That’s it. TWRP Recovery is now installed on your Tecno Boom J5, to boot to recovery mode, simply press and hold Volume Down button + press Power buttton power button
Reply
#5
(01-18-2016, 11:22 PM)xlim Wrote: I'm getting DRAM error help me

create a new thread, this is someone else's support thread

see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
This is what I am get always when I try to flash 

Error 5054   Message:  BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) please check your load matches your target which is to be downloaded 

Help me please
Reply
#7
i need j5 stock rom
Reply
#8
(03-09-2016, 09:00 PM)tunjiadesola Wrote: i need j5 stock rom

create a new thread, this is someone else's support thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
There is another way to install twrp without using pc
Reply
#10
download the twrp for tecno j5..it contains two file..scatter file and recovery image,unzip d folder and move only the recovery IMG to SD folder....After then download Flashify apk
Reply










Users browsing this thread:
1 Guest(s)