Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Spreadtrum phone need help with CWM

#11
(This post was last modified: 01-05-2016, 03:21 AM by Qiangong2. )

(01-04-2016, 09:29 AM)rishabh1x Wrote: try going to /dev/block directory and check for a folder named by-name
if you find it then try using this command

ls -al /dev/block/[your path to by-name]

in my case it is
ls -al /dev/block/platform/sdio_mmc/by-name

It will list all your partition names with their corresponding blocks

I don't have that folder


Update: When I put an SD card in, it calls the sdcard as mmcblk0. The zram0 partition is the only one that is on the physical device.


Reply
#12
(01-04-2016, 06:10 PM)Qiangong2 Wrote: I don't have that folder


Update: When I put an SD card in, it calls the sdcard as mmcblk0. The zram0 partition is the only one that is on the physical device.

Use the adb method @ https://forum.hovatek.com/thread-1405.html
Reply
#13
(01-05-2016, 10:30 AM)hovatek Wrote:
(01-04-2016, 06:10 PM)Qiangong2 Wrote: I don't have that folder


Update: When I put an SD card in, it calls the sdcard as mmcblk0. The zram0 partition is the only one that is on the physical device.

Use the adb method @ https://forum.hovatek.com/thread-1405.html

I used it and got a bunch of weird partitions that i've never seen before on Mediatek or Qualcomm phones.

I have sp1, 2ndb1, kpanic, and ubipac. I've attached the screenshot. What do I do now? Thanks by the way for helping Smile

Attached Files
.png   Screenshot_2016-01-05-14-48-52-1.png (Size: 34.11 KB / Downloads: 20)
Reply
#14
(01-06-2016, 02:28 AM)Qiangong2 Wrote: I used it and got a bunch of weird partitions that i've never seen before on Mediatek or Qualcomm phones.

I have sp1, 2ndb1, kpanic, and ubipac. I've attached the screenshot. What do I do now? Thanks by the way for helping Smile

Ok. Any luck finding the phone's firmware?
Reply
#15
(This post was last modified: 01-06-2016, 05:34 PM by Qiangong2. )
(01-06-2016, 01:20 PM)hovatek Wrote: [quote='Qiangong2' pid='64774' dateline='1452043684']
I used it and got a bunch of weird partitions that i've never seen before on Mediatek or Qualcomm phones.

I have sp1, 2ndb1, kpanic, and ubipac. I've attached the screenshot. What do I do now? Thanks by the way for helping Smile


Ok. Any luck finding the phone's firmware?

No, my phone is the Blu dash jr 3g. Nothing on firmwarefile or anywhere else. Nothing on their support site either. I asked support for the firmware and they said very rudely that ota updates are the only way I could get firmware, and even then I wouldn't get a copy of the recovery. I would just get a partial system.img to flash.
Reply
#16
(01-06-2016, 05:33 PM)Qiangong2 Wrote: No, my phone is the Blu dash jr 3g. Nothing on firmwarefile or anywhere else. Nothing on their support site either. I asked support for the firmware and they said very rudely that ota updates are the only way I could get firmware, and even then I wouldn't get a copy of the recovery. I would just get a partial system.img to flash.

thats serious
Reply
#17
(01-06-2016, 07:37 PM)hovatek Wrote:
(01-06-2016, 05:33 PM)Qiangong2 Wrote: No, my phone is the Blu dash jr 3g. Nothing on firmwarefile or anywhere else. Nothing on their support site either. I asked support for the firmware and they said very rudely that ota updates are the only way I could get firmware, and even then I wouldn't get a copy of the recovery. I would just get a partial system.img to flash.

thats serious

Yeah.

Could the firmware be the ubipac MTD partition? Or not? Also, what is the 2ndb1 partition for?

Sent from my SGH-M919 using Hovatek mobile
Reply
#18
(01-06-2016, 08:32 PM)Qiangong2 Wrote: Yeah.

Could the firmware be the ubipac MTD partition? Or not? Also, what is the 2ndb1 partition for?

Sent from my SGH-M919 using Hovatek mobile

Install ROM Toolbox lite on the phone
Reply
#19
(01-07-2016, 01:23 PM)hovatek Wrote:
(01-06-2016, 08:32 PM)Qiangong2 Wrote: Yeah.

Could the firmware be the ubipac MTD partition? Or not? Also, what is the 2ndb1 partition for?

Sent from my SGH-M919 using Hovatek mobile

Install ROM Toolbox lite on the phone

I tried backing up using that, and it doesn't work. I really want CWM for my device, but I don't know what to do...
Reply
#20
(01-08-2016, 01:45 AM)Qiangong2 Wrote: I tried backing up using that, and it doesn't work. I really want CWM for my device, but I don't know what to do...

I'm not asking you to backup using it. I need to explore something using it
Reply










Users browsing this thread:
2 Guest(s)