Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] NETWORK PROBLEM ON ANDROID PHONE TECNO M3

#61

Check and see what I should do I use titanium backup to detect it



Attached Files
.png   Screensh.png (Size: 43.3 KB / Downloads: 1)
.png   Screensht.png (Size: 43.09 KB / Downloads: 1)
Reply
#62
(This post was last modified: 01-22-2015, 09:37 AM by Noblen. )
you don't need titanium backup.
select the scatter file from the flash folder.
it shud make a list of items lik boot. recovery etc.
press download. buh make sure the files it listed are in the folder.
preferably I use sp version 3. search it in google.
don't plug your phone until you press download.
make sure its off.
while you press download.
hold volume down button.
then plug in your usb.
you should see the box loading in the sp too.
allow it to finish flashing. until it says success. don't remove it.
Reply
#63
(01-22-2015, 08:53 AM)Xsaren Wrote: Check it and see what I should do or is mine so difficult to resolve pls help me

before you even proceed, have you created the !files to flash folder?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#64
(01-22-2015, 09:11 AM)Xsaren Wrote: Check and see what I should do I use titanium backup to detect it

we're using Sp flash tool here, not titanium backup. have you created the !files to flash folder? 
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#65
Yes I have created it and using sp flash tool v5 have this preloader,Mbr,EBR1,UBOOT,BOOTIMG,RECOVERY,SEC_RO,LOGO,ANDROID, but CACHE and USRDATA unmark

Using version3
Same challenge and again m I flashing or formatting
Reply
#66
What should I do
Reply
#67
(01-22-2015, 12:47 PM)Xsaren Wrote: What should I do

just click scatter loading . in the window that pops up, select the scatter file from the !files to flash folder
when the list appears, untick preloader then click download.
click Yes when prompted
Now, connect the phone to pc while switched off
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#68
There is a warning dat Not All Images are correctly Loaded which may cause boot up issue Do u want to go on downloading anyway?
Yes. No

Reply
#69
Just stop without loading after I followed due procedure
Reply
#70
(01-22-2015, 08:48 PM)Xsaren Wrote: Just stop without loading after I followed due procedure

did you connect the switched off phone after clicking download and Yes? then what sis Sp flash tool show?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)