Hovatek Forum HARDWARE SIM / Network unlock How to unlock Glo Bolt MF60
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


How to unlock Glo Bolt MF60

How to unlock Glo Bolt MF60

X3non
X3non
X3non
Recognized Contributor
22,062
08-01-2016, 02:21 PM
#1



This is a step by step guide to unlock glo bolt mf60 3g mifi

Requirements


How to Unlock Glo Bolt MF60


  1. Remove the sim from the device
  2. Connect the MF60 device to your PC using a USB cord
  3. Install the MIFI's software from My computer. (you can skip this step if you've already installed it)
  4. Extract the contents of the Glo Bolt MF60 zip file you downloaded
  5. Run the firmware installer, without doing anything else! It will detect what port the device is connected to. Remember this port and don’t disconnect the equipment so the port number won’t change.
  6. After you must have seen the port number, you can go ahead and close the firmware installer.
  7. Install QPST from the extracted zip file.
  8. After the installation open Start > QPST > QPST Configuration.
  9. If the equipment is not automatically listed on the list, manually add the port you saw in the firmware installer.
  10. To add a new port, push the button “Add New Port...”
  11. After the modem is successfully detected in QPST Configuration open:
  12. Start > QPST > EFS Explorer
  13. In EFS Explorer, on the left side, click the “/” to go to the root of the equipment’s file system.
  14. On right side more folders and some files. Be very careful what you do there so you won’t delete anything by mistake.
  15. Save the files "Version" and "Config", in order to have a backup. (if something goes wrong copy them back).
  16. Delete the files "Version" and "Config".
  17. Exit all QPST windows.
  18. Run the MF60 Firmware installer.
  19. While the installer is still open, run and apply the MF60-patch from the extracted zip file.
  20. After applying the patch you can press the update button on the installer.
  21. If it gets stuck at 19/100,
  22. Disconnect the device,
  23. Remove and put back the battery,
  24. Close the firmware installer windows,
  25. Manually power ON the device,
  26. Connect the device back to the PC through USB then..
  27. Run DC-unlocker
  28. Select ZTE datacards
  29. Use auto detect
  30. Click the search button
  31. Once the device has been detected, click on the unlocking tab
  32. Click on Unlock
  33. Device should be unlocked now (test by putting a foreign sim)


Important Notice
  • This unlock method is meant to unlock the MF60 MIFI device but was reconstructed for GLO BOLT MF60.
  • If you intend to try it out, I shall not be held responsible for any damages caused.
  • If you are not comfortable with the procedure, then i suggest you use DC unlocker to unlock your device
This post was last modified: 04-10-2019, 11:27 PM by X3non.
Paplow
Paplow
Paplow
Enthusiastic Member
5
13-12-2018, 12:49 PM
#2
(08-01-2016, 02:21 PM)X3non ...
Can you please drop a working link for these tools? this is longer working "Search for the tools online OR download all the tools @ https://drive.google.com/file/d/0B_4ZA-8...sp=sharing"
This post was last modified: 13-12-2018, 08:03 PM by X3non.
X3non
X3non
X3non
Recognized Contributor
22,062
13-12-2018, 08:02 PM
#3
(13-12-2018, 12:49 PM)Paplow Can you please drop a working link for these tools? this is longer working "Search for the tools online OR download all the tools ...

added
Paplow
Paplow
Paplow
Enthusiastic Member
5
14-12-2018, 10:58 AM
#4
(13-12-2018, 08:02 PM)X3non
(13-12-2018, 12:49 PM)Paplow Can you please drop a working link for these tools? this is longer working "Search for the tools online OR download all the tools ...

added

Downloaded.. Thanks
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram