Hovatek Forum MOBILE Android [Tutorial] How to repair null or invalid IMEI on Mediatek
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to repair null or invalid IMEI on Mediatek

[Tutorial] How to repair null or invalid IMEI on Mediatek

Pages (34): Previous 112 13 14 15 1634 Next
raypower0986
raypower0986
raypower0986
Junior Member
15
13-10-2014, 02:19 PM



I have done the nvram restore method and imei replacement method but did not work. I have also requested for a stock rom of my tecno f7 but haven't gotten it. I don't understand the mpob_001 method. Because after downloading and extracting the imei exercise. If I open command prompt on my system trying to create a new file If I type imei exe it will show not recognise as an internal or external command
hovatek
hovatek
hovatek
Administrator
49,570
13-10-2014, 04:21 PM
(13-10-2014, 02:19 PM)raypower0986 I have done the nvram restore method and imei replacement method but did not work. I have also requested for a stock rom of my tecno f7 but haven't gotten it. I don't understand the mpob_001 method. Because after downloading and extracting the imei exercise. If I open command prompt on my system trying to create a new file If I type imei exe it will show not recognise as an internal or external command

that's because you're doing it wrong.
1. Do you have your two IMEI numbers ready
2. Have you downloaded IMEI.exe

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
raypower0986
raypower0986
raypower0986
Junior Member
15
13-10-2014, 04:26 PM
(13-10-2014, 04:21 PM)hovatek
(13-10-2014, 02:19 PM)raypower0986 I have done the nvram restore method and imei replacement method but did not work. I have also requested for a stock rom of my tecno f7  but haven't gotten it. I don't understand the mpob_001 method. Because after downloading and extracting the imei exercise. If I open command prompt on my system trying to create a new file If I type imei exe it will show not recognise as an internal or external command

that's because you're doing it wrong.
1. Do you have your two IMEI numbers ready
2. Have you downloaded IMEI.exe 
   Yes I have downloaded the imei. Exe In my computer and I also have my two imei numbers 

Yes I have
hovatek
hovatek
hovatek
Administrator
49,570
13-10-2014, 05:19 PM
(13-10-2014, 04:26 PM)raypower0986 Yes I have

* extract the content of the IMEI.zip
* open the folder where IMEI.exe is located
* hold Shift on your PC and don't release
* right-click on any space in this folder then select Open command window here
you can proceed from there

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
raypower0986
raypower0986
raypower0986
Junior Member
15
14-10-2014, 09:39 AM



(13-10-2014, 05:19 PM)hovatek
(13-10-2014, 04:26 PM)raypower0986 Yes I have

* extract the content of the IMEI.zip
* open the folder where IMEI.exe is located
* hold Shift on your PC and don't release
* right-click on any space in this folder then select Open command window here
you can proceed from there

i have done the mp0b_001 method on my tecno f7 still did not work,when i did the nvram backup method i get this error message ERROR  :pttycmd1 device NOT found!
hovatek
hovatek
hovatek
Administrator
49,570
14-10-2014, 09:55 AM
(14-10-2014, 09:39 AM)raypower0986 i have done the mp0b_001 method on my tecno f7 still did not work,when i did the nvram backup method i get this error message ERROR  :pttycmd1 device NOT found!

the MPB method should've worked. did you successfully create the MP0B_001 file using your 2 IMEI numbers?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
raypower0986
raypower0986
raypower0986
Junior Member
15
14-10-2014, 10:04 AM
hovatek
raypower0986 i have done the mp0b_001 method on my tecno f7 still did not work,when i did the nvram backup method i get this error message ERROR  :pttycmd1 device NOT found!

the MPB method should've worked. did you successfully create the MP0B_001 file using your 2 IMEI numbers?

yes i successfully created another one when i click permission the boxes there were 12 but i have to look the tick boxes of the working one which is 4 and i follow same but did not work,even went back to tick all the same
hovatek
hovatek
hovatek
Administrator
49,570
14-10-2014, 10:08 AM
(14-10-2014, 10:04 AM)raypower0986 yes i successfully created another one when i click permission the boxes there were 12 but i have to look the tick boxes of the working one which is 4 and i follow same but did not work,even went back to tick all the same

just to be sure, you placed the mp0b file in the correct location right?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
raypower0986
raypower0986
raypower0986
Junior Member
15
14-10-2014, 10:19 AM
(14-10-2014, 10:08 AM)hovatek
(14-10-2014, 10:04 AM)raypower0986 yes i successfully created another one when i click permission the boxes there were 12 but i have to look the tick boxes of the working one which is 4 and i follow same but did not work,even went back to tick all the same

just to be sure, you placed the mp0b file in the correct location right?

i placed it on nvram folder then restart the phone 
hovatek
hovatek
hovatek
Administrator
49,570
14-10-2014, 01:43 PM



(14-10-2014, 10:19 AM)raypower0986 i placed it on nvram folder then restart the phone 

please, create a new thread for this by clicking http://www.hovatek.com/forum/newthread.php?fid=4 to make this easier

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (34): Previous 112 13 14 15 1634 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram