Hello There, Guest! Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Tutorial] How to revive a totally dead Mediatek Android phone by joining the Board Mount Points
#11
(This post was last modified:02-15-2016, 01:19 PM by Benzalf. )

One more thing: I noticed that formatting the Tecno D5 before flashing using the 'Format all flash except bootloader' option caused it to become totally dead!
DO NOT EVER CHOOSE "FORMAT ALL FLASH EXCEPT BOOTLOADER" OPTION FOR TECNO D5!!!
I was also able to revive it by connecting the GND and KCOLO, then choosing the 'Format All Flash' option. I make no mistake. I really experimented with it!!!
This way, you can even flash the ROM without the soldered cable because the PC will detect it, that's after choosing the 'Format all Flash' option when the two gold plates on the board are joined.

Sent from my HTC Vision using Tapatalk


Reply
#12
(02-13-2016, 08:22 AM)gayus Wrote: hovatec can you please pin point the exact location on my deadbrick infinix note 2 x600 there is no label for kcolo pin while the gnd is labeled +6282218880229

(02-13-2016, 11:15 AM)wolfrino Wrote: plz can u show us some support n answewr us about infinix x600 dead after flash n show us that test point location on motherboard or shall we stopp selling infinix phones for customers cuz things like this makes us in troubles n make bad reputation of infinix brand
my fone no +201063633081

The fix for Infinix Note 2 X600 is @ https://forum.hovatek.com/thread-11899.html
Reply
#13
One more thing: I noticed that formatting the Tecno D5 before flashing using the 'Format all flash except bootloader' option caused it to become totally dead!
DO NOT EVER CHOOSE "FORMAT ALL FLASH EXCEPT BOOTLOADER" OPTION FOR TECNO D5!!!
I was also able to revive it by connecting the GND and KCOLO, then choosing the 'Format All Flash' option. I make no mistake. I really experimented with it!!!
This way, you can even flash the ROM without the soldered cable because the PC will detect it, that's after choosing the 'Format all Flash' option when the two gold plates on the board are joined.


------------------------------------------
you are right bro, how can i go out from this problem, i have format the whole flash except bootloader, any help, the pc not even detecting the phone, i really need to revive this phone
Reply
#14
(04-26-2016, 06:58 PM)ayoolar Wrote: ------------------------------------------
you are right bro, how can i go out from this problem, i have format the whole flash except bootloader, any help, the pc not even detecting the phone, i really need to revive this phone

follow the guide in the first post on this thread
Reply
#15
(This post was last modified:04-17-2017, 02:13 PM by bangou. )
Hi,
please, i tried to fix my dead infinix x551 HOT NOTE.
i apply this post https://forum.hovatek.com/thread-11802.html
but i no see the GND point on  the Mother Board, neither KCOLO point.

!! my infinix goes totally dead after successfully flashing wrong firmware.

characteristic:
Infinix X551
RAM: 512MB
Model: K1
CPU: MT6580

please, help me.
Reply
#16
(04-17-2017, 02:05 PM)bangou Wrote: Hi,
please, i tried to fix my dead infinix x551 HOT NOTE.
i apply this post https://forum.hovatek.com/thread-11802.html
but i no see the GND point on  the Mother Board, neither KCOLO point.

!! my infinix goes totally dead after successfully flashing wrong firmware.

characteristic:
Infinix X551
RAM: 512MB
Model: K1
CPU: MT6580

please, help me.

I don't think you need to join points yet.
Please, create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply





Users browsing this thread:
1 Guest(s)