Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Tecno P9 Stuck at Booting and Rebooting After Flashing of Stock Rom

#1

I Just flashed my Tecno p9 with Mtk Backup of Stock Rom Provided in This site and My Phone got stuck booting and then rebooting again...now it's finally dead and not even Charging....Please Help


Reply
#2
I flashed the Rom because Internal Storage and Memory Card Just disappeared/Unmounted and refused To Mount Again
Reply
#3
(01-20-2015, 11:56 AM)emmanho2 Wrote: I flashed the Rom because Internal Storage and Memory Card Just disappeared/Unmounted and refused To Mount Again
B4 u flashed d rom, did u clear data n Format System?? Try flashing again. Can u use Sp Flashtools?? I think thr' s a tut on that on this Forum.... #eva willing to help u.



#PEACE
Reply
#4
(01-20-2015, 11:53 AM)emmanho2 Wrote: I Just flashed my Tecno p9 with Mtk Backup of Stock Rom Provided in This site and My Phone got stuck booting and then rebooting again...now it's finally dead and not even Charging....Please Help

the P9 here is 4.2. was your p9 also 4.2? or was it 4.4?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
Thank U Sir.No I didn't Clear the data b4 Flashing and Now I can't even Boot into Recovery to Dat....but I Formatted with sp flash tools b4 flashing

Reply
#6
It's Android 4.2
Reply
#7
(01-20-2015, 07:49 PM)emmanho2 Wrote: It's Android 4.2

format then flash the stock backup again using SP flash tool. lets know what happens
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
(01-20-2015, 09:44 PM)hovatek Wrote:
(01-20-2015, 07:49 PM)emmanho2 Wrote: It's Android 4.2

format then flash the stock backup again using SP flash tool. lets know what happens

I tried doing that but the Sp flash tools no longer detects it...and d Tab doesn't power on,even after hours of Charging
Reply
#9
(01-21-2015, 05:35 PM)emmanho2 Wrote: I tried doing that but the Sp flash tools no longer detects it...and d Tab doesn't power on,even after hours of Charging

have you uninstalled vcom drivers using usb deview then manually installed again?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#10
(01-21-2015, 06:46 PM)hovatek Wrote:
(01-21-2015, 05:35 PM)emmanho2 Wrote: I tried doing that but the Sp flash tools no longer detects it...and d Tab doesn't power on,even after hours of Charging

have you uninstalled vcom drivers using usb deview then manually installed again?

how do I do dat?
Reply










Users browsing this thread:
1 Guest(s)