XBQ-P11 Firmware Require
XBQ-P11 Firmware Require
(25-02-2016, 07:02 PM)mealax Hi! I need X-BQ P11(Starting Logo "Huawei")What were you trying to flash?
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone
1) 5.5 Inch QHD IPS capacitive touch screen
2) MTK6580, Cortex A7 quad core, 1.3GHz
3) 2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz
4) 1GB RAM 8GB ROM
(26-02-2016, 11:42 AM)matybazz(25-02-2016, 07:02 PM)mealax Hi! I need X-BQ P11(Starting Logo "Huawei")What were you trying to flash?
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone
1) 5.5 Inch QHD IPS capacitive touch screen
2) MTK6580, Cortex A7 quad core, 1.3GHz
3) 2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz
4) 1GB RAM 8GB ROM
(26-02-2016, 01:43 PM)mealax [quote='matybazz' pid='69936' dateline='1456483337']Nothing came up in your device
[quote='mealax' pid='69881' dateline='1456423332']
Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone
1) 5.5 Inch QHD IPS capacitive touch screen
2) MTK6580, Cortex A7 quad core, 1.3GHz
3) 2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz
4) 1GB RAM 8GB ROM
(25-02-2016, 07:02 PM)mealax Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone
1) 5.5 Inch QHD IPS capacitive touch screen
2) MTK6580, Cortex A7 quad core, 1.3GHz
3) 2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz
4) 1GB RAM 8GB ROM
(28-02-2016, 12:53 PM)mealax 1. What were you trying to flash?
2. Was flashing successful or it got interrupted?
Ans=1. I am to try to install Doogee-X5 firmware, because there is some error(i.e unfortunately gallery has been close) and some one told me it was firmware/Rom/Flash/Software issue. I search its firmware on google but not found, and finally i try install Doogee-X5 (Cause its BB is also MT6580) firmware through SP-Flashtool.
Ans=2. After installing Firmware my Smartphone got black screen, and unable to turn on, I am also try to start it on recovery mode, by pressing "Up-Volume Key+ Power Key" , Down-Volume Key + Power Key", "Up-Volume Key+Home+ Power Key" and "Up-Volume Key+Down-Volume Key+Home+Power Key" and so on but failed.
After that i brought my Smartphone to Repair Shop but he said that, this phone is dead and it could be repair after installing software. After searching its firmware he didn't found its Firmware. And now i am searching it on your forum.
(29-02-2016, 10:27 AM)mealax No, i didn't see any error, my cell is off during installing firmware. when the updating was done, My phone was not starting.