Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

XBQ-P11 Firmware Require

#1
Wink 

Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone

1) 5.5 Inch QHD IPS capacitive touch screen

2) MTK6580, Cortex A7 quad core, 1.3GHz

3) 2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz

4) 1GB RAM 8GB ROM


Reply
#2
(02-25-2016, 07:02 PM)mealax Wrote: Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone

1)  5.5 Inch QHD IPS capacitive touch screen

2)  MTK6580, Cortex A7 quad core, 1.3GHz

3)  2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz

4) 1GB RAM 8GB ROM
What were you trying to flash?
Reply
#3
(02-26-2016, 11:42 AM)matybazz Wrote:
(02-25-2016, 07:02 PM)mealax Wrote: Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone

1)  5.5 Inch QHD IPS capacitive touch screen

2)  MTK6580, Cortex A7 quad core, 1.3GHz

3)  2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz

4) 1GB RAM 8GB ROM
What were you trying to flash?

i am trying to install new firmware.
Reply
#4
(02-26-2016, 01:43 PM)mealax Wrote: [quote='matybazz' pid='69936' dateline='1456483337']
[quote='mealax' pid='69881' dateline='1456423332']
Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone

1)  5.5 Inch QHD IPS capacitive touch screen

2)  MTK6580, Cortex A7 quad core, 1.3GHz

3)  2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz

4) 1GB RAM 8GB ROM
Nothing came up in your device
Reply
#5
[/quote]
Nothing came up in your device
[/quote]

My Cell phone is currently dead and need firmware! Kindly do something for me.
Reply
#6
(02-25-2016, 07:02 PM)mealax Wrote: Hi! I need X-BQ P11(Starting Logo "Huawei")
Phone not starting after unsuccessful flashing, anyone send me its firmware link.
Cell Information
X-BQ P11 5.5 inch MTK6580 Quad Core 1GB RAM Low Cost Touch Screen Mobile Phone

1)  5.5 Inch QHD IPS capacitive touch screen

2)  MTK6580, Cortex A7 quad core, 1.3GHz

3)  2G: GSM 850/900/1800/1900MHz; 3G: WCDMA 850/2100MHz

4) 1GB RAM 8GB ROM

1. What were you trying to flash?
2. Was flashing successful or it got interrupted?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: technical@hovatek.com
* Skype: Hovatek
Reply
#7
1. What were you trying to flash?
2. Was flashing successful or it got interrupted?

Ans=1. I am to try to install Doogee-X5 firmware, because there is some error(i.e unfortunately gallery has been close) and some one told me it was firmware/Rom/Flash/Software issue. I search its firmware on google but not found, and finally i try install Doogee-X5 (Cause its BB is also MT6580) firmware through SP-Flashtool.

Ans=2. After installing Firmware my Smartphone got black screen, and unable to turn on, I am also try to start it on recovery mode, by pressing "Up-Volume Key+ Power Key" , Down-Volume Key + Power Key", "Up-Volume Key+Home+ Power Key" and "Up-Volume Key+Down-Volume Key+Home+Power Key" and so on but failed.

After that i brought my Smartphone to Repair Shop but he said that, this phone is dead and it could be repair after installing software. After searching its firmware he didn't found its Firmware. And now i am searching it on your forum.
Reply
#8
(02-28-2016, 12:53 PM)mealax Wrote: 1. What were you trying to flash?
2. Was flashing successful or it got interrupted?

Ans=1. I am to try to install Doogee-X5 firmware, because there is some error(i.e unfortunately gallery has been close) and some one told me it was firmware/Rom/Flash/Software issue. I search its firmware on google but not found, and finally i try install Doogee-X5 (Cause its BB is also MT6580) firmware through SP-Flashtool.

Ans=2. After installing Firmware my Smartphone got black screen, and unable to turn on, I am also try to start it on recovery mode, by pressing "Up-Volume Key+ Power Key" , Down-Volume Key + Power Key", "Up-Volume Key+Home+ Power Key" and "Up-Volume Key+Down-Volume Key+Home+Power Key" and so on but failed.

After that i brought my Smartphone to Repair Shop but he said that, this phone is dead and it could be repair after installing software. After searching its firmware he didn't found its Firmware. And now i am searching it on your forum.

Seems you'll need the firmware. We ran a quick search also but nothing came up.
I need to know. During flashing, did you get the green ok prompt or there was an error then the phone went dead?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: technical@hovatek.com
* Skype: Hovatek
Reply
#9
No, i didn't see any error, my cell is off during installing firmware. when the updating was done, My phone was not starting.
Reply
#10
(02-29-2016, 10:27 AM)mealax Wrote: No, i didn't see any error, my cell is off during installing firmware. when the updating was done, My phone was not starting.

Ok. You'll need to keep searching for the firmware then
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: technical@hovatek.com
* Skype: Hovatek
Reply










Users browsing this thread:
1 Guest(s)