Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] problems on connecting Tecno m3

#31

(01-28-2015, 11:17 PM)tonytechgsm Wrote: Yes. I have tried both.
When I tried with Phantom A+ I get this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Faild!
[HINT]:
Please check your load matches to your target which is to be downloaded.

I was able to flashed successful with Phantom A but the phone did not work well.
you'll need to use the firmware upgrade option here but before you proceed
1. Is there a memory card in the phone?
2. Can the phone boot into recovery mode?


Reply
#32
There is no memory card in the phone and the phone cannot boot into recovery mode
Reply
#33
I am have the same issue with this thread https://forum.hovatek.com/thread-976.html
I have followed it and download the scatter file you send to the man , but it doesn't work for me . my phone is still rebooting in blank mode and no recovery mode.
Reply
#34
(01-29-2015, 12:49 AM)tonytechgsm Wrote: There is no memory card in the phone and the phone cannot boot into recovery mode

put a formatted memory card in the phone then boot
Reply
#35
(01-29-2015, 02:47 AM)tonytechgsm Wrote: I am have the same issue with this thread https://forum.hovatek.com/thread-976.html
I have followed it and download the scatter file you send to the man , but it doesn't work for me . my phone is still rebooting in blank mode and no recovery mode.

download CWM recovery image for f7 @ https://forum.hovatek.com/thread-75.html then flash it to the phone. let's know if it's able to enter recovery mode
Reply
#36
I have tried that still not working .
Some one told me that I should try and get another MTK backup file . that , its likely that the back up file I have is not compatible with the phone .
or what else do you think I can do?
Reply
#37
(01-30-2015, 07:04 AM)tonytechgsm Wrote: I have tried that still not working .
Some one told me that I should try and get another MTK backup file . that , its likely that the back up file I have is not compatible with the phone .
or what else do you think I can do?

yes, you might need to get a working f7. flash the stock backup again then try enter recovery mode
Reply
#38
Ok , I will try that .
Please , how can I flash itel it 1451 and it1452.
I need Itel note flashing and unlock procedure .
Reply
#39
(01-30-2015, 04:26 PM)tonytechgsm Wrote: Ok , I will try that .
Please , how can I flash itel it 1451 and it1452.
I need Itel note flashing and unlock procedure .

create a new thread for this by clicking https://forum.hovatek.com/newthread.php?fid=4
Reply
#40
Please, I need permission to download Tecno D7 . The one I downloaded is corrupt.
and again , as premium user , I think I don't need to be requesting for each again.
Reply










Users browsing this thread:
1 Guest(s)