Hovatek Forum MOBILE Android help wiko lenny dead after firmware flash
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


help wiko lenny dead after firmware flash

help wiko lenny dead after firmware flash

Pages (2): Previous 1 2
bestbuy
bestbuy
bestbuy
Junior Member
29
09-05-2016, 07:31 AM
#11



Connect while pressing boot key..or volume down key..first flash preloader

Sent from my HIGHWAY SIGNS using Tapatalk
VanCroft
VanCroft
VanCroft
Enthusiastic Member
7
09-05-2016, 07:32 PM
#12
(09-05-2016, 07:31 AM)bestbuy Connect while pressing boot key..or volume down key..first flash preloader

Sent from my HIGHWAY SIGNS using Tapatalk

Ok, thank you, but how? with SP_Flash_Tool? can you explain in more detail? On the mainboard it is written s5200ap and i have in Wiko-Lenny folder preloader_5201ap.How can i flash preloader? Thank you for your patience and for your help.
Oh! i`m stupid. I now know. Must check only preloader in SP Flash Tool.Ok. And when it`s done preloader flash what to do next? I
attach a picture with SP Flash Tool. It`s good for my phone?
This post was last modified: 09-05-2016, 08:37 PM by VanCroft.
Attached Files
.jpg
Flash.jpg
Size: 265.1 KB / Downloads: 10
VanCroft
VanCroft
VanCroft
Enthusiastic Member
7
11-05-2016, 08:43 PM
#13
(09-05-2016, 07:32 PM)VanCroft
(09-05-2016, 07:31 AM)bestbuy Connect while pressing boot key..or volume down key..first flash preloader

Sent from my HIGHWAY SIGNS using Tapatalk

Ok, thank you, but how? with SP_Flash_Tool? can you explain in more detail? On the mainboard it is written s5200ap and i have in Wiko-Lenny folder preloader_5201ap.How can i flash preloader? Thank you for your patience and for your help.
Oh! i`m stupid. I now know. Must check only preloader in SP Flash Tool.Ok. And when it`s done preloader flash what to do next? I
attach a picture with SP Flash Tool. It`s good for my phone?

Nothing happens when i press vol down or vol up or all key. Phone is connecting and disconecting all the time. The whole procedure must be done with battery out isn`t it? Please help me !!
bestbuy
bestbuy
bestbuy
Junior Member
29
12-05-2016, 08:44 AM
#14
Look...it happened to me with the same wiko phone...do you know how to disable driver signature from your pc?

Sent from my HIGHWAY SIGNS using Tapatalk
VanCroft
VanCroft
VanCroft
Enthusiastic Member
7
12-05-2016, 10:40 AM
#15



(12-05-2016, 08:44 AM)bestbuy Look...it happened to me with the same wiko phone...do you know how to disable driver signature from your pc?

Sent from my HIGHWAY SIGNS using Tapatalk

Yes, I did this way: During boot-up computer, continuously press <F8> to get to Advanced Boot Options. Note: On some systems, you need to first press <F2> to go into Boot Menu, then press <F8> to reach Advanced Boot Options.
2. When the menu appears, use the DOWN arrow key to scroll to “Disable Driver Signature Enforcement.”
3. Press <Enter>.
4. Continue the boot process.
5. After your computer has completed the boot process, please install the drivers per the included instructions. I think it`s good.If you know a better way please tell me.
This post was last modified: 12-05-2016, 11:28 AM by VanCroft.
bestbuy
bestbuy
bestbuy
Junior Member
29
12-05-2016, 04:14 PM
#16
Try to flash preloader alone

Sent from my HIGHWAY SIGNS using Tapatalk
bestbuy
bestbuy
bestbuy
Junior Member
29
12-05-2016, 04:15 PM
#17
Use different port...and by the way after connecting to pc..which device is mentioned in the device manager?

Sent from my HIGHWAY SIGNS using Tapatalk
VanCroft
VanCroft
VanCroft
Enthusiastic Member
7
12-05-2016, 07:28 PM
#18
(12-05-2016, 04:15 PM)bestbuy Use different port...and by the way after connecting to pc..which device is mentioned in the device manager?

Sent from my HIGHWAY SIGNS using Tapatalk

In the device manager: Mediatek USB VCOM (Android) (COM5)
How can i flash preloader when my device is connecting and disconecting all the time. First must stop the disconnection and after that flashing but i do not know what to do to not be disconnected.
X3non
X3non
X3non
Recognized Contributor
22,062
12-05-2016, 09:20 PM
#19
(12-05-2016, 07:28 PM)VanCroft In the device manager: Mediatek USB VCOM (Android) (COM5)
How can i flash preloader when my device is connecting and disconecting all the time. First must stop the disconnection and after that flashing but i do not know what to do to not be disconnected.

reinstall vcom preloader driver @ https://www.hovatek.com/forum/thread-440.html
VanCroft
VanCroft
VanCroft
Enthusiastic Member
7
13-05-2016, 10:14 AM
#20



(12-05-2016, 09:20 PM)X3non
(12-05-2016, 07:28 PM)VanCroft In the device manager: Mediatek USB VCOM (Android) (COM5)
How can i flash preloader when my device is connecting and disconecting all the time. First must stop the disconnection and after that flashing but i do not know what to do to not be disconnected.

reinstall vcom preloader driver @ https://www.hovatek.com/forum/thread-440.html


thanks for the reply I will try
I managed to bring it to life with your help and VirtualG from XDADevelopers forum
here's how I did: Make short between Kcolo point and GND.
Be sure battery is full.
Use V20 firmware.
Select firmware up-grade from Smart Phone Flash Tools.
Connect phone to PC with Volume + push
Don't forget to remove the jumper after flash

thank you for all the help!!!!!!
This post was last modified: 14-05-2016, 09:21 PM by VanCroft.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram