Hovatek Forum DEVELOPMENT Android [Please help] custom recovery!
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] custom recovery!

[Please help] custom recovery!

Pages (3): Previous 1 2 3 Next
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
21-03-2016, 09:10 PM
#11



I made the backup with online nandroid backup under the android and I tried restore it with cherry mobile j1 recovery and I think it was a big mistake, because MyPhone was softbricked, and I sent the phone service!
This post was last modified: 21-03-2016, 09:11 PM by Ferbir88.
hovatek
hovatek
hovatek
Administrator
49,570
22-03-2016, 03:20 PM
#12
(21-03-2016, 09:10 PM)Ferbir88 I made the backup with online nandroid backup under the android and I tried restore it with cherry mobile j1 recovery and I think it was a big mistake, because MyPhone was softbricked, and I sent the phone service!

We'll work more on the custom recovery

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
22-03-2016, 04:37 PM
#13
Okay! Thank you!
I'm waiting for it!
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
25-03-2016, 07:06 PM
#14
Hi! I tried again the Cherry Mobile J1
MIUI recovery! It works but not properly, because There are three line bottom of the display when I'm start the recovery.
I think it is a display density or display resolution problem.
When I've tried it ago I've restored only the system! I haven't made backup from the data, cache, and boot partition.
Can be this a problem? whe I've tried it ago Myphone was bootloop.

Here is the recovery infomation:
Name: MIUI Recovery for A74A by Aje Permana Sidik
Version: 2.05
Device: Evercross A74A Winner-T
Date: 2015-11-01

Recovery log:

Starting recovery on Sat Oct 17 17:43:33 2015
Initializing...
scripte aborted!
(pid:135)function event_filter(line 185) cause i > 0 failed return 0

DEVICE NAME: sci-keypad - /sys/board_properties/virtualkeys.sci-keypad
EV ST: minX: 0 maxX: 0 minY: 0 maxY: 0
EV MT: minX: 0 maxX: 0 minY: 0 maxY: 0

DEVICE NAME: headset-keyboard - /sys/board_properties/virtualkeys.headset-keyboard
EV ST: minX: 0 maxX: 0 minY: 0 maxY: 0
EV MT: minX: 0 maxX: 0 minY: 0 maxY: 0
miui/s: Opening Freetype
[az_readmem]:/res/themes/miui4/titlebar.png is not exist.
scripte aborted!
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p16 (null) 0
2 /misc emmc /dev/block/mmcblk0p20 (null) 0
3 /recovery emmc /dev/block/mmcblk0p19 (null) 0
4 /uboot emmc /dev/block/mmcblk0boot1 (null) 0
5 /system ext4 /dev/block/mmcblk0p17 (null) 0
6 /cache ext4 /dev/block/mmcblk0p18 (null) 0
7 /data ext4 /dev/block/mmcblk0p21 (null) 0
8 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
9 /external_sd emmc /storage/sdcard0 (null) 0

Command: "/sbin/recovery"

ro.runmode=normal
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.zygote=zygote32
persist.sys.usb.config=mass_storage,adb,diag
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
ro.dalvik.vm.native.bridge=0
ro.build.id=LMY47D
ro.build.display.id=LMY47D release-keys
ro.build.version.incremental=eng.root.20150911.162219
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.date=Fri Sep 11 16:23:55 CST 2015
ro.build.date.utc=1441959835
ro.build.type=user
ro.build.user=root
ro.build.host=ubuntu-B85M-DS3H-A
ro.build.tags=release-keys
ro.build.flavor=v130_trx_2b2-user
ro.product.model=A74A
ro.product.brand=EVERCOSS_A74A
ro.product.name=v130_trx_2b2
ro.product.device=v130_trx_2b2
ro.product.board=v130_trx_2b2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=EVERCOSS_A74A
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=sc8830
ro.build.product=v130_trx_2b2
ro.build.description=v130_trx_2b2-user 5.1 LMY47D eng.root.20150911.162219 release-keys
ro.build.fingerprint=EVERCOSS_A74A/v130_trx_2b2/v130_trx_2b2:5.1/LMY47D/root09111623:user/release-keys
ro.build.characteristics=default
ro.ts.beautify.fun=false
ro.sf.lcd_density=240
ro.sf.lcd_width=54
ro.sf.lcd_height=96
ro.opengles.version=131072
ro.product.hardware=SP7731GEA_HD_V1.0.0
debug.hwui.render_dirty_regions=false
debug.bt.lowspeed=110
persist.ttydev=ttyVUART0
conn.connectivity_change_delay=0
ro.product.partitionpath=/dev/block/platform/sdio_emmc/by-name/
ro.ril.ecclist=112,911,#911,*911
persist.modem.w.enable=1
persist.modem.w.nvp=w
ro.modem.w.dev=/proc/cpw/
ro.modem.w.tty=/dev/stty_w
ro.modem.w.eth=seth_w
ro.modem.w.snd=1
ro.modem.w.diag=/dev/slog_w
ro.modem.w.loop=/dev/spipe_w0
ro.modem.w.nv=/dev/spipe_w1
ro.modem.w.assert=/dev/spipe_w2
ro.modem.w.vbc=/dev/spipe_w6
ro.modem.w.id=0
ro.modem.w.fixnv_size=0x40000
ro.modem.w.runnv_size=0x60000
persist.sys.engpc.disable=1
ro.config.ksm.support=true
ro.config.zram.support=true
ro.board_ram_size=high
ro.config.low_ram=false
drm.service.enabled=true
ro.btwifisoftap.coexist=false
ro.sf.hwrotation=0
ro.wifip2p.coexist=false
ro.build.display.spid=SC7731_V130_TRX_2B2_V07_150911
ro.build.display.spid.customer=EVERCOSS_A74A_5.1_V07
persist.sys.timezone=Asia/Jakarta
persist.sys.defaulttimezone=Asia/Jakarta
ro.auto.call.recording=true
persist.sys.blowingunlock=true
persist.sys.assistant=true
ro.launcher3.extend.function=true
ro.screen.cap.menu=true
ro.calendar.dateicon=true
ro.videoplay.sub.win.support=true
persist.sys.support.vt=true
ro.calendar.htzone.default.on=true
headset.take.pic=true
ro.enable.check.spell=false
ro.no.anim.scale=true
ro.removed.nosdcard.msg=true
ro.show.developer.menu=true
ro.default.call.open=true
ro.data.default.off=true
ro.allapp.page.trans=false
ro.com.android.mobiledata=false
ro.general.vibrate.enable=true
ro.no.exclamation.mark=true
ro.no.clearbutton=true
ro.keyguard.customer.date=true
persist.sys.language=en
persist.sys.country=US
ro.test.playsound.outside=true
ro.hook.control.hold=true
ro.no.data.no.networkflag=true
ro.remove.smartlock=true
smartwake_control_music=true
ro.add.memory.title=true
ro.camera.defaults.settings=true
ro.hspa.network=true
ro.rom.8G=false
persist.service.adb.enable=1
ro.sdcardon.install.sdcard=true
ro.show.wide.angle=true
ro.add_antithift=true
ro.carrier=unknown
ro.modem.wcn.enable=1
ro.modem.wcn.dev=/dev/cpwcn
ro.modem.wcn.tty=/deiv/stty_wcn
ro.modem.wcn.diag=/dev/slog_wcn
ro.modem.wcn.assert=/dev/spipe_wcn2
ro.modem.wcn.id=1
ro.modem.wcn.count=1
camera.disable_zsl_mode=1
ro.digital.fm.support=1
persist.sys.sprd.modemreset=1
ro.adb.secure=1
persist.sys.sprd.wcnreset=1
ro.storage.flash_type=2
persist.storage.type=1
sys.tempsd.enable=1
sys.internal.emulated=1
ro.storage.install2internal=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
persist.msms.phone_default=0
persist.sys.modem.diag=,gser
sys.usb.gser.count=4
lmk.autocalc=false
ro.homekey.physical=true
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.msms.phone_count=2
persist.msms.phone_count=2
ro.modem.w.count=2
persist.radio.multisim.config=dsds
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.1_r2
ro.config.ringtone0=evercoss-ring.mp3
ro.config.ringtone1=evercoss-ring.mp3
ro.config.notification_sound=evercoss-ring-mms.mp3
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
ro.lovelyfonts_support=1
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.rock.gota.brand=EVERCOSS_A74A
ro.rock.gota.model=A74A
ro.rock.gota.version=EVERCOSS_A74A_5.1_V07
ro.rock.gota.sd=true
ro.rock.gota.uaver=3.1.2
ro.factorytest=0
ro.serialno=90404F9D01418
ro.bootmode=factorytest
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=
ro.revision=0
ro.confg.hw_ubootversion=
ro.service.systemstattool=false
ro.config.hw_boardid=unknown
ro.config.hw_test_version=true
persist.sys.powerup_reason=NORMAL
init.svc.recovery=running
init.svc.adbd=running

SD Card space free: 3922MB
Backing up cache...
Generating md5 sum...

Backup complete!
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
25-03-2016, 08:14 PM
#15



I think a problem again the path.

Cherry Mobile J1 MIUI Recovery file system table:

0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p16 (null) 0
2 /misc emmc /dev/block/mmcblk0p20 (null) 0
3 /recovery emmc /dev/block/mmcblk0p19 (null) 0
4 /uboot emmc /dev/block/mmcblk0boot1 (null) 0
5 /system ext4 /dev/block/mmcblk0p17 (null) 0
6 /cache ext4 /dev/block/mmcblk0p18 (null) 0
7 /data ext4 /dev/block/mmcblk0p21 (null) 0
8 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
9 /external_sd emmc /storage/sdcard0 (null) 0

And your Recovery File system table:

0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/platform/sdio_emmc/by-name/boot (null) 0
2 /misc emmc /dev/block/platform/sdio_emmc/by-name/misc (null) 0
3 /recovery emmc /dev/block/platform/sdio_emmc/by-name/recovery (null) 0
4 /uboot emmc /dev/block/platform/sdio_emmc/by-name/uboot (null) 0
5 /system ext4 /dev/block/platform/sdio_emmc/by-name/system (null) 0
6 /cache ext4 /dev/block/platform/sdio_emmc/by-name/cache (null) 0
7 /data ext4 /dev/block/platform/sdio_emmc/by-name/userdata (null) 0
8 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
9 /external_sd emmc /storage/sdcard0 (null) 0

The Cherry Mobile J1 recovery file system path not same as your recovery file system path.
And This line isn't in your recovery: Command: "/sbin/recovery"
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
25-03-2016, 08:23 PM
#16
And you can see in the cherry mobile recovery log could make the backup:
"SD Card space free: 3922MB
Backing up cache...
Generating md5 sum...

Backup complete! "

The system partition backup size is: 1.24 Gb
data:2.49 Gb
boot: 15 Mb
cache: 29 kb
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
27-03-2016, 08:17 AM
#17
Hi Hovatek! I want to ask you, Can you optimized for myphone venum this recovery:
  https://mega.nz/#!AV4imb4B!OyheQBx97PwDB...L5MAGVcArE


Because I was testing it and working the:
Wipe data factory reset
Battery stats wipe
I made backup from the cache then I restored it and working too!

But the problem is the display.
There is three line bottom of the display!

And can you see can I restore data and a system partition without problem

Thank you for your answer!
hovatek
hovatek
hovatek
Administrator
49,570
28-03-2016, 04:58 PM
#18
(27-03-2016, 08:17 AM)Ferbir88 Hi Hovatek! I want to ask you, Can you optimized for myphone venum this recovery:
  https://mega.nz/#!AV4imb4B!OyheQBx97PwDB...L5MAGVcArE


Because I was testing it and working the:
Wipe data factory reset
Battery stats wipe
I made backup from the cache then I restored it and working too!

But the problem is the display.
There is three line bottom of the display!

And can you see can I restore data and a system partition without problem

Thank you for your answer!

We've been quite busy and will look into this asap

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Ferbir88
Ferbir88
Ferbir88
Junior Member
34
02-04-2016, 09:30 PM
#19
Hi Hovatek!

I've fixed your recovery, what you made for me! The problem was the path, I modified the recovery.fstab in the initrd/etc folder. I can make backup, factory reset, battery stats wipe Work!

Thank you for your Work!
abdulbasit54321
abdulbasit54321
abdulbasit54321
Enthusiastic Member
9
12-04-2016, 03:29 PM
#20



Please I need twrp 3.0.0.0 rcovery for tecno phantom z
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram