installing software through odin is not official but it can be used and its for those who want to upgrade, refresh, or restore stock firmware from custom roms. So more importantly am not responsible for whatever damage you may cause to your phone so be sure before proceeding
Install your odin if this recent version doesn't work for your device search the one for your device but this should work ok.
Procedure
* first after installation open odin and it will look like this
* now select AP (that is where your downloaded rom in md5 format is goin and nowhere else take note of that)
* Once the file is in the box, you would now need to turn off your device, and reboot into Download Mode by holding volume Down and power (If using the Galaxy S3, S4, Note 3 or Note 4, Home key will also have to be held) once device vibrates or boots release power button and hold the rest to boot into download mode
* press volume to enter into download mode proper
* connect your phone to pc through the usb cord and make your usb cord is in good condition and once the pc detects your phone it will show a blue colour under ID.COM then click start
Warning: do not interrupt once flashing has started
And after all the flashing process odin would tick or give notification of success and the phone would now begin to the reboot process. If your encounter bootloop power off and boot to recovery by holding power button and volume up plus home key, once phone vibrates release only power keep holdong the rest untill it boots into recovery and wipe cache then reboot
This post was last modified: 17-03-2016, 07:54 PM by matybazz.