Hovatek Forum MOBILE Android [Tutorial] How to write IMEI, Bluetooth & Wi-Fi Address using SN Write tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to write IMEI, Bluetooth & Wi-Fi Address using SN Write tool

[Tutorial] How to write IMEI, Bluetooth & Wi-Fi Address using SN Write tool

Pages (9): Previous 15 6 7 8 9 Next
X3non
X3non
X3non
Recognized Contributor
22,062
28-05-2018, 05:49 PM
#71



(28-05-2018, 03:27 PM)B.c. Hernaez hello sir. how about this? which of these files can be use as my db files? my phone is Oppo A39 MT6750.

Create a new thread so we'll focus on this
See https://www.hovatek.com/forum/thread-514.html for how to create a thread.
abdsamad
abdsamad
abdsamad
Junior Member
18
30-07-2018, 09:23 AM
#72
How to generate Bluetooth, Wi-Fi, Mac Address?
Thanks in advance.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
30-07-2018, 04:30 PM
#73
(30-07-2018, 09:23 AM)abdsamad How to generate Bluetooth, Wi-Fi, Mac Address?
Thanks in advance.

use the addresses from your device, if they are broken and you cant remember or find them then use the addresses of an old scrap device
abdsamad
abdsamad
abdsamad
Junior Member
18
01-08-2018, 02:11 PM
#74
OK. I could get from scrap device but what if the phone is dead. Can I still get the addresses?
freshtyt
freshtyt
freshtyt
Senior Member
2,949
01-08-2018, 04:48 PM
#75



(01-08-2018, 02:11 PM)abdsamad OK. I could get from scrap device but what if the phone is dead. Can I still get the addresses?

no, not unless the info is written on the body of the dead phone. you could try using address from any device only problem is i don't think WiFi conns will allow two device with same add to connect at the same time [not 100sure]
PredestineA
PredestineA
PredestineA
Newbie
1
02-08-2018, 06:39 PM
#76
Thank you very much
Worked perfectly for me on Infinix x601 pro
Mesiya
Mesiya
Mesiya
Newbie
1
15-08-2018, 02:30 PM
#77
Ok my phone is Lenovo a2010a i tried version of SN writer

SN_Write_Tool_v2.1504.00

SN_Write_Tool_v2.1452.00

SN_Write_Tool_v1.1636.00

SN_Write_Tool_v1.1620.00

SN_Write_Tool_v1.1632.00

SN_Write_Tool_v1.1636.00


Installed vcom drivers and every thing needed to able to flash the rom with sp flash tool and phone is flashing and rom written ok.

able to repair imei from maui meta 

follow tutorial completely and view all posts so far.

could please specifically which version will work.

i need to repair wifi and sn and bluetooth addresses on my phone.
This post was last modified: 15-08-2018, 03:00 PM by Mesiya. Edit Reason: explaination mistakes
Attached Files
.jpg
SN writer Error Maui DB Inconsistent.jpg
Size: 155.58 KB / Downloads: 6
xerxes
xerxes
xerxes
Senior Member
8,355
15-08-2018, 03:01 PM
#78
(15-08-2018, 02:30 PM)Mesiya Ok my phone is Lenovo a2010a i tried version of SN writer

SN_Write_Tool_v2.1504.00

SN_Write_Tool_v2.1452.00

SN_Write_Tool_v1.1636.00

Installed vcom drivers able to flash the rom with sp flash tool

able repair imei from maui meta 

follow tutorial completely and view all posts so far.

could please specifically which version will work.

i need to repair wifi and sn and bluetooth addresses on my phone

please create a new thread for this to avoid mixup 
see https://www.hovatek.com/forum/thread-514.html for how to create a thread.
Erycoking
Erycoking
Erycoking
Newbie
1
22-03-2019, 09:19 PM
#79
I am getting the following error when trying to write imei

COM port searching and preloader handshake...
COM port searching and preloader handshake ok
COM port searching and Kernel handshake...
SP_META_ConnectInMetaMode_r Error: maybe is DEFAULT_FAIL cause this error...
Error: Connect failed, Exit Meta Mode

How can I fix this ?????????????????????????????????
X3non
X3non
X3non
Recognized Contributor
22,062
23-03-2019, 09:40 AM
#80



(22-03-2019, 09:19 PM)Erycoking I am getting the following error when trying to write imei

COM port searching and preloader handshake...
COM port searching and preloader handshake ok
COM port searching and Kernel handshake...
SP_META_ConnectInMetaMode_r Error: maybe is DEFAULT_FAIL cause this error...
Error: Connect failed, Exit Meta Mode

How can I fix this ?????????????????????????????????

create a new thread so we'll focus on this
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Pages (9): Previous 15 6 7 8 9 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram