Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] totally dead m3 not flashing

#1

Error 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Old helpoError 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Pls help


Reply
#2
(03-25-2016, 04:29 PM)jjonaivi Wrote: Error 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Old helpoError 4032 

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail 
 
I got this msg wen I tried to flash my  bricked techno m3. I have followed all d possible solutions related to dt error as posted on this forum but no soln yet. sp flash identifies d device, it shows d red line on 100% wen I plug d USB& it starts reading until it gets to 37 or so den it shows d error msg. 

Initialy, wen I flashed it, it flashed successfully and showed Completed, but wen i try to switch on it only vibrates. Pls help

What version of Android was it running on before it got bricked?
Reply
#3
Version 4.2.2
Reply
#4
(03-25-2016, 08:25 PM)jjonaivi Wrote: Version 4.2.2

what was the color of the first tecno logo whenever you turn on the phone?
Reply
#5
(03-25-2016, 08:25 PM)jjonaivi Wrote: Version 4.2.2

was it the Blue or Black background type?
see the pics @ https://forum.hovatek.com/thread-311.html
Reply
#6
(03-26-2016, 11:41 AM)hovatek Wrote:
(03-25-2016, 08:25 PM)jjonaivi Wrote: Version 4.2.2

was it the Blue or Black background type?
see the pics @ https://forum.hovatek.com/thread-311.html

d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg
Reply
#7
(03-26-2016, 06:21 PM)jjonaivi Wrote: d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg

Have you tried the 4.2 New OS and 4.4 firmware?
Reply
#8
(03-26-2016, 10:39 PM)hovatek Wrote:
(03-26-2016, 06:21 PM)jjonaivi Wrote: d blue sir. old version. I even did d backup b4 crashing, so I HV d backup of d ROM & I also HV downloaded d ROM on havatek self but no solution. even wen I tried formating, still d same error msg

Have you tried the 4.2 New OS and 4.4 firmware?

no sir
Reply
#9
(03-28-2016, 09:10 AM)jjonaivi Wrote: no sir

Ok, hope you didn't tick userdata and cache when flashing the Old OS. And hope you selected Download only
Reply
#10
(03-28-2016, 07:41 PM)hovatek Wrote:
(03-28-2016, 09:10 AM)jjonaivi Wrote: no sir

Ok, hope you didn't tick userdata and cache when flashing the Old OS. And hope you selected Download only

no, I didn't select user data & cache & I also click download only. dis what happened, d Phone use to switch on d data itself thus drain ba3. so I had to flash a new rom. at first, I formatted it. via spfllash den download d ROM, it showed d yellow progressive line & wrote completed, but to my surprise I tried to on it, but it only vibrates. Trying to flash it again, I keep seeing that error .it will show 100% & start counting b4 bringing up d error. I HV installed d vcom preloadeder manually, done almost everything, but still no solution. I still need help cos this not d first time I would flash a fone I HV not encountered such problem b4
Reply










Users browsing this thread:
1 Guest(s)