Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] TECNO 8H CUSTOM RECOVERY MANUAL PORT

#1

Hello @ Hovatek and others.

I own a Tecno 8H that unfortunately has been very useless and stubborn DEV-wise.

The bootloader is locked and auto CWM/TWRP installers do not work with it.

However, i have been able to make an insecure boot.img and recovery.img
They both have adbd insecure embedded in them to enable RW on /system in shell easily.

Basically i need your help to port a custom recovery for the device.

the screen resolution is 800 x 1200

the boot and recovery .img (both stock and insecure), and the scatter file can be found here: https://drive.google.com/open?id=0B39xYn...XE0NnVRSkk

Thanks


Reply
#2
(This post was last modified: 04-07-2016, 11:00 AM by ashipaoflagos. )
(04-01-2016, 10:34 AM)ashipaoflagos Wrote: Hello @ Hovatek and others.

I own a Tecno 8H that unfortunately has been very useless and stubborn DEV-wise.

The bootloader is locked and auto CWM/TWRP installers do not work with it.

However, i have been able to make an insecure boot.img and recovery.img
They both have adbd insecure embedded in them to enable RW on /system in shell easily.

Basically i need your help to port a custom recovery for the device.

the screen resolution is 800 x 1280

the boot and recovery .img (both stock and insecure), and the scatter file can be found here: https://drive.google.com/open?id=0B39xYn...XE0NnVRSkk

Thanks



Bumping this!!

@Hovatek no response? anyone?

anyway i've gotten as far as booting a CTR recovery successfully, but it does not mount the internal sdcard (and i think other partitions). really can't figure out the error (maybe in fstab). perhaps anyone with a bit of experience can chip in?
Reply
#3
(04-01-2016, 10:34 AM)ashipaoflagos Wrote: Hello @ Hovatek and others.

I own a Tecno 8H that unfortunately has been very useless and stubborn DEV-wise.

The bootloader is locked and auto CWM/TWRP installers do not work with it.

However, i have been able to make an insecure boot.img and recovery.img
They both have adbd insecure embedded in them to enable RW on /system in shell easily.

Basically i need your help to port a custom recovery for the device.

the screen resolution is 800 x 1200

the boot and recovery .img (both stock and insecure), and the scatter file  can be found here: https://drive.google.com/open?id=0B39xYn...XE0NnVRSkk

Thanks

Sorry, we've been really busy. We'll work on it asap
Reply
#4
I've been able to make a functional Carliv Port.

No longer has any errors.

Still trying to test it. It flashes .zip files successfully.

will see if it will do a backup properly.

meanwhile if there's a TWRP from another device that can be ported please point me in its direction

1280 x 800 resolution
Reply










Users browsing this thread:
1 Guest(s)