[Please help] tecno h5 clone
[Please help] tecno h5 clone
(01-04-2016, 12:57 PM)jospah prezz Hello,i have a tecno H5 clone which has a spredtrum cpu. i formated it after it used to say unfortunately android has stopped. after formatting it was well. i then made an attempt to read and write flash intentionally. the usb cable shaked om the process of writing flash and it stopped. the phone now dont power on or charge. the pc doesnt also recognize it not unless i remove battery,insert cable and hold boot key then insert the battery it is recognised. i have tried writing the flash to success but the phone doesnt still power on or charge,please help
(02-04-2016, 08:12 AM)jospah prezz yeah it was successful but the phone doesnt power. the flash was a .bin file i dont know whether it should be it or something else.
(02-04-2016, 09:53 PM)hovatekplease can you assist me with the firmware(02-04-2016, 08:12 AM)jospah prezz yeah it was successful but the phone doesnt power. the flash was a .bin file i dont know whether it should be it or something else.
bin or pac depending on how it was created.
you'll need a different firmware then.
(03-04-2016, 02:27 PM)jospah prezz please can you assist me with the firmware
(12-04-2016, 05:43 PM)jospah prezz is there another software i can use to flash it because the upgrade tool only loads pac file and this is a bin file?
Sent from my ASUS_T00J using Hovatek mobile
(14-04-2016, 09:00 PM)jospah prezz I have flashed severely with it and the phone still don't power on
Sent from my itel it1451 using Hovatek mobile