Hi, Guest! Login / Register    




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to flash files to a Tecno N3 or P3 using AIO Flasher

#1
(This post was last modified: 04-07-2015, 09:19 AM by hovatek. )

Requirement

* Download AIO Flasher @ https://hovatek.com/redirect.php?link=ht...lasher.zip
* Download Tecno N3 / P3 USB Drivers @ https://hovatek.com/redirect.php?link=ht...driver.rar and manually install using this technique @ https://forum.hovatek.com/thread-440.html
* Download Tecno N3 / P3 Backup @ https://forum.hovatek.com/thread-311.html
*PC
* USB cord

Procedure

* Boot the Tecno N3/P3 into Fastboot (Remove the battery > Hold volume down (decrease) > Plug in the USB cable (Connected to a source of power) > Wait till you see the TECNO logo displayed on the screen > Wait for about 5 second then release the volume down (decrease) button ) 
* Connect the phone to PC while in fastboot
* Launch AIO Flasher
* Flash the desired file(s) using AIO flasher (see https://forum.hovatek.com/thread-466.html )


Reply
#2
wel i reali appreciate all ur effort nd follow up. Bt my problm nw is stil booring into fasr boot. Dis method dint work. Wen eva i removd d ba3, nd plug in usb cord. It wil vibrate nd d tecno logo wil nw comes up. Bt wen eva i remov d ba3, hold down vol down nd power on button, den plug in usb cord. D phone wunt even vibrate no comes up tecno logo.
Warm regards

Prof Mboy (Mboy13)
Network Engineer
CTTL, Contec Global
Birnin Kebbi,
Kebbi State

08140421345
08155755282
Reply
#3
(01-28-2015, 12:35 PM)mboy13 Wrote: wel i reali appreciate all ur effort nd follow up. Bt my problm nw is stil booring into fasr boot. Dis method dint work. Wen eva i removd d ba3, nd plug in usb cord. It wil vibrate nd d tecno logo wil nw comes up. Bt wen eva i remov d ba3, hold down vol down nd power on button, den plug in usb cord. D phone wunt even vibrate no comes up tecno logo.

you're not supposed to hold power button. also, you're supposed to release the volume button some second after the Tecno appears
Reply
#4
(01-28-2015, 02:27 PM)hovatek Wrote:
(01-28-2015, 12:35 PM)mboy13 Wrote: wel i reali appreciate all ur effort nd follow up. Bt my problm nw is stil booring into fasr boot. Dis method dint work. Wen eva i removd d ba3, nd plug in usb cord. It wil vibrate nd d tecno logo wil nw comes up. Bt wen eva i remov d ba3, hold down vol down nd power on button, den plug in usb cord. D phone wunt even vibrate no comes up tecno logo.

you're not supposed to hold power button. also, you're supposed to release the volume button some second after the Tecno appears

am n getting dis. DO u mean i shld nt hold d power on button.

Nd als wen i try holding only vol down, it wil vibrate, displayed d tecno, i wait for few secs den released my hand nd yet no reaction bt wil stock at d logo.
Warm regards

Prof Mboy (Mboy13)
Network Engineer
CTTL, Contec Global
Birnin Kebbi,
Kebbi State

08140421345
08155755282
Reply
#5
(This post was last modified: 01-28-2015, 03:44 PM by hovatek. )
NO power button. Already addressing this issue @ the N3 thread you created
Reply
#6
ok nd waitin for respond der cos i v jst downlosded d file am asked to download.
Warm regards

Prof Mboy (Mboy13)
Network Engineer
CTTL, Contec Global
Birnin Kebbi,
Kebbi State

08140421345
08155755282
Reply
#7
What of if the P3 is not coming up before at all, no sign of charging.
Reply
#8
(03-31-2015, 04:59 AM)Tejrooney Wrote: What of if the P3 is not coming up before at all, no sign of charging.

create a new thread by clicking https://forum.hovatek.com/newthread.php?fid=4
Reply










Users browsing this thread:
1 Guest(s)