[Please help] TECHNO M3 GOT DEAD WHILE FLASHING WITH SP
[Please help] TECHNO M3 GOT DEAD WHILE FLASHING WITH SP
(07-04-2016, 12:35 PM)martzboy hi Admin my techno m3 got dead while flash and now the only response i get while trying to reflash is
Error.png S_BROM_DOWNLOAD_DA_FAIL
[Description]
l [H/W] Fail to download DA to baseband chip's internal SRAM!
[Reason]
1. There’s a cable communication problem between Flash Tool and Boot ROM.
2. Target might be shutdown unexpectedly or target lost power supply.
3. The DA is not correct.
[Solution]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occurred in target side.
the Device does not turn on or even charge please i need help urgently
Regards