04-07-2016, 12:35 PM
hi Admin my techno m3 got dead while flash and now the only response i get while trying to reflash is
l [H/W] Fail to download DA to baseband chip's internal SRAM!
1. There’s a cable communication problem between Flash Tool and Boot ROM.
2. Target might be shutdown unexpectedly or target lost power supply.
3. The DA is not correct.
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occurred in target side.
the Device does not turn on or even charge please i need help urgently