Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Tecno L3 stuck at boot animation after flashing

#11
(This post was last modified: 02-15-2015, 05:39 PM by adutwumraymond. )

Please i tried to install cmw recovery with mtk tools but it couldn't root the phone so i couldn't do it
This is the error i got


In system already available: Android Debug Bridge version 1.0.26

--->>> Connect to device <<<---
--- ERROR : do not install utils
ATTENTION! Requests for confirmation on the device screen are possible!
--- ERROR : SU inaccessible


Reply
#12
(02-15-2015, 05:13 PM)adutwumraymond Wrote: Please i tried to install cmw recovery with mtk tools but it couldn't root the phone so i couldn't do it
This is the error i got


In system already available:  Android Debug Bridge version 1.0.26

--->>> Connect to device <<<---
--- ERROR  : do not install utils
ATTENTION! Requests for confirmation on the device screen are possible!
--- ERROR : SU inaccessible

1. Is the phone rooted?
2. If rooted, did you click Ok on PC and Grant on phone?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
I've flashed it several times with your stock firmware so i don't think its rooted unless your firmware is already rooted.
And I clicked Ok on the PC and the Phone can't boot past the boot animation so i did it in Factory Mode
Reply
#14
(02-17-2015, 11:04 AM)adutwumraymond Wrote: I've flashed it several times with your stock firmware so i don't think its rooted unless your firmware  is already rooted.
And I clicked Ok on the PC and the Phone can't boot past the boot animation so i did it in Factory Mode

let me get you straight. is the phone bricked?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#15
i can't tell, all i can say is that after flashing with your firmware it can't boot past the boot anination

Reply
#16
(This post was last modified: 02-25-2015, 09:05 PM by hovatek. )
(02-25-2015, 06:13 PM)adutwumraymond Wrote: i can't tell, all i can say is that after flashing with your firmware it can't boot past the boot anination

boot into recovery mode and do a factory reset then remove the battery for 30 seconds, slot back in and boot (if you get a could not mount /data error then read https://forum.hovatek.com/thread-580.html )
if that doesnt work then boot the phone into factory mode (volume down + power) and flash cwm recovery to the phone using this guide @ https://forum.hovatek.com/thread-455.html
..standing by
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)