Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

SP Flash error 3148

#1

pls helppppp.. SP flash tool error 3148..ive searched everywhere on ur site but never seen solution to error 3148..only saw 3149

this error has not been able to bypass the boot loop my lenovo pad is on.

pls help..tried all i can


Reply
#2
You can try downloading preloader and move it to target_bin folder and rename or move checksum.ini from target_bin.Ensure that you are using correct USB cable that came along with the phone.Make sure you have the most recent version of SP Flash Tool.Verify that files listed on the SP Flash Tool in your ROM folder.


hadoop training in chennai | informatica training in chennai | aws training in chennai
Reply
#3
(04-11-2016, 07:17 AM)paulnevinthomas Wrote: You can try downloading preloader and move it to target_bin folder and rename or move checksum.ini from target_bin.Ensure that you are using correct USB cable that came along with the phone.Make sure you have the most recent version of SP Flash Tool.Verify that files listed on the SP Flash Tool in your ROM folder.



I've done all this sir... Still same error 3148

hadoop training in chennai | informatica training in chennai | aws training in chennai
Reply
#4
(04-10-2016, 10:00 PM)olumi Wrote: pls helppppp.. SP flash tool error 3148..ive searched everywhere on ur site but never seen solution to error 3148..only saw 3149

this error has not been able to bypass the boot loop my lenovo pad is on.

pls help..tried all i can

Can I see a screenshot of the error message
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#5
(04-11-2016, 11:50 AM)hovatek Wrote:
(04-10-2016, 10:00 PM)olumi Wrote: pls helppppp.. SP flash tool error 3148..ive searched everywhere on ur site but never seen solution to error 3148..only saw 3149

this error has not been able to bypass the boot loop my lenovo pad is on.

pls help..tried all i can

Can I see a screenshot of the error message

Attached Files
.jpg   hova1.JPG (Size: 93.78 KB / Downloads: 7)
.jpg   hova2.JPG (Size: 27.38 KB / Downloads: 4)
Reply
#6
(04-11-2016, 06:12 PM)olumi Wrote: Can I see a screenshot of the error message

How many versions of SP flash tool have you used?
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#7
(04-11-2016, 10:42 PM)hovatek Wrote:
(04-11-2016, 06:12 PM)olumi Wrote: Can I see a screenshot of the error message

How many versions of SP flash tool have you used?

I have used like 4 versions now
Reply
#8
(04-19-2016, 04:47 PM)olumi Wrote: I have used like 4 versions now

Try a different PC and cord
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply
#9
(04-19-2016, 06:23 PM)hovatek Wrote:
(04-19-2016, 04:47 PM)olumi Wrote: I have used like 4 versions now

Try a different PC and cord

I have already done that sir.. Still same error 3148

Sent from my TECNO-C8 using Hovatek mobile
Reply
#10
(04-19-2016, 08:54 PM)olumi Wrote: I have already done that sir.. Still same error 3148

Sent from my TECNO-C8 using Hovatek mobile

the phone's port or emmc chip might be damaged
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: [email protected]
* Skype: Hovatek
Reply










Users browsing this thread:
1 Guest(s)