Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Any alternate way to backup stock firmware without root ?

#11

I entered starting address : 0x3AB00 and length : 0x13900
this values which are told by mtk droid tools
but same error "address or length bytes not align"


Reply
#12
(04-22-2016, 06:48 AM)awesomeironman Wrote: I entered starting address : 0x3AB00 and length : 0x13900
this values which are told by mtk droid tools
but same error "address or length bytes not align"

Do you have the lollipop scatter file?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
yes have
Reply
#14
(04-22-2016, 03:11 PM)awesomeironman Wrote: yes have

use that to readback recovery
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#15
OK so I tried to get dump using old lollipop scatter file
and yeah I got stock recovery dump without error
and it worked too ( I tried to boot in that stock recovery dump using fastboot boot command )
but the full stock firmware dump was having some problems
I've attached a zip file in which there are some
screen shots and that old lollipop scatter file
1) as first image shows I to get stock recovery dump
and I got full dump without error
2) second screen shot shows I tried to take full firmware dump
by un-ticking recovery dump
using old lollipop scatter file
even this I got without error
3) so 3rd ss shows the successfully acquired stock recovery and stock firmware dump
4)Ok, so after getting the dump we have to process it right ?
so in MTKdroid tools I clicked on "To process
ROM_From Flash tool"
by connecting my phone to PC
and I got this error (as shown in mtk droid tools )
5) and the last 5th ss shows that I tried fastboot commands to test if the recovery dump is correct or not
and I successfully booted into it ,
so that dump was correct ^_^
6) so why does this happen ?
I got correct recovery dump
but why I get wrong firmware dump ?
some say that it is because
my device is having fake mtk chipsets
as mtk droid tools also shows fake mtk device !!!
also ...I opened that ROM_1 file using 7zip a compression software
and I saw contents in it
as my old lollipop scatter file shows preloader and other contents
there wasn't preloader
instead there was proinfo


Attached Files
.zip   ForHovatek.zip (Size: 248.33 KB / Downloads: 2)
Reply
#16
Am unable to unlock infinity hot2 please help
Reply
#17
(04-24-2016, 07:39 AM)odion Wrote: Am unable to unlock infinity hot2 please help

Create a new thread to avoid mixup see https://forum.hovatek.com/thread-514.html for how to create thread
Reply
#18
(04-24-2016, 05:06 AM)awesomeironman Wrote: OK so I tried to get dump using old lollipop scatter file
and yeah I got stock recovery dump without error
and it worked too ( I tried to boot in that stock recovery dump using fastboot boot command )
but the full stock firmware dump was having some problems
I've attached a zip file in which there are some
screen shots and that old lollipop scatter file
1) as first image shows I to get stock recovery dump
and I got full dump without error
2) second screen shot shows I tried to take full firmware dump
by un-ticking recovery dump
using old lollipop scatter file
even this I got without error
3) so 3rd ss shows the successfully acquired stock recovery and stock firmware dump
4)Ok, so after getting the dump we have to process it right ?
so in MTKdroid tools I clicked on "To process
ROM_From Flash tool"
by connecting my phone to PC
and I got this error (as shown in mtk droid tools )
5) and the last 5th ss shows that I tried fastboot commands to test if the recovery dump is correct or not
and I successfully booted into it ,
so that dump was correct ^_^
6) so why does this happen ?
I got correct recovery dump
but why I get wrong firmware dump ?
some say that it is because
my device is having fake mtk chipsets
as mtk droid tools also shows fake mtk device !!!
also ...I opened that ROM_1 file using 7zip a compression software
and I saw contents in it
as my old lollipop scatter file shows preloader and other contents
there wasn't preloader
instead there was proinfo


I expected the lollipop scatter file to work fine.
attach the Lollipop scatter file and screenshot of Blocks Map . Need to check a few things
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#19
okay here it is
lollipop scatter file
in attachment

Attached Files
.txt   MT6582_Android_scatter.txt (Size: 7.53 KB / Downloads: 1)
Reply
#20
(04-24-2016, 06:11 PM)awesomeironman Wrote: okay here it is
lollipop scatter file
in attachment

also need a screenshot of the Blocks Map from MTK droid tools
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)