Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Problem flashing a bricked tecno H5

#1

please, i have an issue here. My phone is
Tecno H5...i av done the mtk backup of a
working H5 to flash the dead H5 ( no sign
of life, not charging, not powering on, no
effect on pressing any key) but each time
i select the scatter file frm the mtk backup, press download and connect
phone, the error i get is ''brom error
4032'' also the vcom mtk driver displays
''error code 10 unable to start'' after
installation. I am using the the right and
correct mtk backup and scatter file for the flashing, so i don't know what's
wrong or is it the drivers? Pls help me
out...


Reply
#2
(01-31-2015, 10:58 AM)Wizyoung Wrote: please, i have an issue here. My phone is
Tecno H5...i av done the mtk backup of a
working H5 to flash the dead H5 ( no sign
of life, not charging, not powering on, no
effect on pressing any key) but each time
i select the scatter file frm the mtk backup, press download and connect
phone, the error i get is ''brom error
4032'' also the vcom mtk driver displays
''error code 10 unable to start'' after
installation. I am using the the right and
correct mtk backup and scatter file for the flashing, so i don't know what's
wrong or is it the drivers? Pls help me
out...

1. did you create the !files to flash folder?
2. whats the color of the TECNO when  you boot the working phone, white or blue?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(This post was last modified: 02-01-2015, 02:32 AM by Wizyoung. Edit Reason: corrected a typo )
(01-31-2015, 01:12 PM)hovatek Wrote:
(01-31-2015, 10:58 AM)Wizyoung Wrote: please, i have an issue here. My phone is
Tecno H5...i av done the mtk backup of a
working H5 to flash the dead H5 ( no sign
of life, not charging, not powering on, no
effect on pressing any key) but each time
i select the scatter file frm the mtk backup, press download and connect
phone, the error i get is ''brom error
4032'' also the vcom mtk driver displays
''error code 10 unable to start'' after
installation. I am using the the right and
correct mtk backup and scatter file for the flashing, so i don't know what's
wrong or is it the drivers? Pls help me
out...

1. did you create the !files to flash folder?
2. whats the color of the TECNO when you boot the working phone, white or blue?

yes. I created !files to flash folder using mtk droid tool. As for the colour u asked, if it is the TECNO logo then it is white but later changes to an amimated coloured one like blue on the working one. Pls what shld i do? I'm jx out of ideas right now...
Reply
#4
(02-01-2015, 02:26 AM)Wizyoung Wrote: yes. I created !files to flash folder using mtk droid tool. As for the colour u asked, if it is the TECNO logo then it is white but later changes to an amimated coloured one like blue on the working one. Pls what shld i do? I'm jx out of ideas right now...

the error 4032 is a mismatch error. what's the full error message and the hint at the bottom?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
here si the full error- ''Error 4032
Message: BROM ERROR : S_FT_ENABLE_
DRAM_FAIL (4032) [EMI] Enable DRAM fail [ HINT ] :
Please check your load Matches
to your Targer : which is to be
downloaded .''
yet i am using the correct files for flashing...a good mtk backup from a good working tecno h5....or is it becos the faulty one is white while the good working one is black? lOLz....
The drivers i downloaded from this site also displays ''error code 10- device can not start''. I used a pc running winOS7 and another with winOS8. Still the same error code 10 on device manager....
Reply
#6
i have disabled driver verification on both pcs using ur guide.
Reply
#7
(02-01-2015, 08:19 PM)Wizyoung Wrote: here si the full error-  ''Error 4032
Message: BROM ERROR : S_FT_ENABLE_
DRAM_FAIL (4032) [EMI] Enable DRAM fail [ HINT ] :
Please check your load Matches
to your Targer : which is to be
downloaded .''
yet i am using the correct files for flashing...a good mtk backup from a good working tecno h5....or is it becos the faulty one is white while the good working one is black? lOLz....
The drivers i downloaded from this site also displays ''error code 10- device can not start''. I used a pc running winOS7 and another with winOS8. Still the same error code 10 on device manager....

apparently, sp flash tool doesnt think bot phones match. we'll need to compare it with out own H5 backup to confirm if there are now two variants of H5 as we suspect. zip the !files to flash folder of the working H5 then upload to dropbox and lets have the link.
meanwhile, try using a windows 7 PC
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
also, do both phones show white TECNO on boot?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
yes both phones display white tecno on boot
Reply
#10
also, what about the driver displaying error code 10 on device manager? Or it does not affect the flashing process too?
Reply










Users browsing this thread:
1 Guest(s)