Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Samsung Grand Neo GT-I9060 (MediaTek MT6575) Flash Problem

#11

(04-24-2016, 10:21 AM)Master2016 Wrote: More Info
Now I just made Screenshots for mobile (without see anything just guess everything position and tab it)
I noticed that when I go to system settings screen goes horizontally but when go to main menu goes normal
I remember system properties and now I'm sure the system is exactly same as original
so where is the problem?

try flashing only system.img from any of the other firmware


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#12
(04-24-2016, 05:34 PM)hovatek Wrote: try flashing only system.img from any of the other firmware
I did try all downloaded firmwares system.img it still same
only differents in bars colors.
and also i tried flash other preloaders and uboot but no change.
Reply
#13
(This post was last modified: 04-25-2016, 04:56 PM by hovatek. )
(04-24-2016, 07:03 PM)Master2016 Wrote: I did try all downloaded firmwares system.img it still same
only differents in bars colors.
and also i tried flash other preloaders and uboot but no change.

its most likely a uboot / lk.bin or preloader thing. You'll need to keep searching till you find a compatible uboot or preloader; thats assuming its not a hardware issue
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
(04-25-2016, 04:55 PM)hovatek Wrote: its most likely a uboot / lk.bin or preloader thing. You'll need to keep searching till you find a compatible uboot or preloader; thats assuming its not a hardware issue

Thank you for keep helping me.
I still searching, downloading and testing with no luck yet
I found one ROM have same original ROM scatter file and flashed it but still have same problem.

is there anyway to find out if it's hardware issue or not?
Reply
#15
(04-25-2016, 06:21 PM)Master2016 Wrote: ...
is there anyway to find out if it's hardware issue or not?

you'd have to take the phone apart and check if the screen connector (Flex) is fixed properly and isnt crowded with dust as well

Reply
#16
(04-25-2016, 08:37 PM)X3non Wrote: you'd have to take the phone apart and check if the screen connector (Flex) is fixed properly and isnt crowded with dust as well

It was working normally without any display problems
I just flashed it with wrong ROM got this problem immediately
Is there any chance wrong ROM cause Hardware issues?
If so maybe I need replace screen?
also is there any windows software to check hardware issues?
Reply
#17
(04-25-2016, 09:12 PM)Master2016 Wrote: It was working normally without any display problems
I just flashed it with wrong ROM got this problem immediately
Is there any chance wrong ROM cause Hardware issues?
If so maybe I need replace screen?
also is there any windows software to check hardware issues?

distorted screen is either caused by
* corrupted SW (uboot / lk.bin)
* Hardware (damaged flex or screen)

flashing wrong rom wont cause a hardware issue..
if the display problems started after flashing with wrong rom then you'd just have to keep searching for the correct rom to fix it
Reply
#18
(04-26-2016, 03:08 PM)X3non Wrote: distorted screen is either caused by
* corrupted SW (uboot / lk.bin)
* Hardware (damaged flex or screen)

flashing wrong rom wont cause a hardware issue..
if the display problems started after flashing with wrong rom then you'd just have to keep searching for the correct rom to fix it

Thank you I hope it will be fixed soon.
I'm wondering If the ROM have exactly same official ROM scatter file and the same CPU is that mean its absolute the correct ROM for my device?
Reply
#19
(04-26-2016, 03:32 PM)Master2016 Wrote: Thank you I hope it will be fixed soon.
I'm wondering If the ROM have exactly same official ROM scatter file and the same CPU is that mean its absolute the correct ROM for my device?

No
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)