Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] How do I find Samsung galaxy j7 (SM-J700H) Baseband version

#1

I have a bricked samsung Galaxy 7(SM-J700H) from a friend. I wanted to flash it but I couldn't find its specific Firmware because I don't have device's baseband version number.

Pls help me a way which can help me find this number. The device is stuck at samsung J7 logo.


Reply
#2
(This post was last modified: 04-25-2016, 10:29 AM by matybazz. )
(04-24-2016, 08:54 PM)naka2903 Wrote: I have a bricked samsung Galaxy 7(SM-J700H) from a friend. I wanted to flash it but I couldn't find its specific Firmware because I don't have device's baseband version number.

Pls help me a way which can help me find this number. The device is stuck at samsung J7 logo.

I don't think you need the build number to download the firmware you need the model number which should be at the back of the phone after you pull out the battery and also the region if neccessary..
Have you tried factory reset in recovery mode? See here https://forum.hovatek.com/thread-479.html for how to boot to recoverty..
Reply
#3
(04-24-2016, 08:54 PM)naka2903 Wrote: I have a bricked samsung Galaxy 7(SM-J700H) from a friend. I wanted to flash it but I couldn't find its specific Firmware because I don't have device's baseband version number.

Pls help me a way which can help me find this number. The device is stuck at samsung J7 logo.

can the phone boot up or is totally dead?
Reply
#4
"can the phone boot up or is totally dead?"

it stucks at boot logo

Sent from my TECNO M3 using Hovatek mobile
Reply
#5
"I don't think you need the build number to download the firmware you need the model number which should be at the back of the phone after you pull out the battery and also the region if neccessary..
Have you tried factory reset in recovery mode? See here https://forum.hovatek.com/thread-479.html for how to boot to recoverty.."

I have read the tutorial and followed the steps mentioned, the phone cannot boot into recovery. It just stuck at boot logo

Sent from my TECNO M3 using Hovatek mobile
Reply
#6
(04-25-2016, 10:28 AM)matybazz Wrote:
(04-24-2016, 08:54 PM)naka2903 Wrote: I have a bricked samsung Galaxy 7(SM-J700H) from a friend. I wanted to flash it but I couldn't find its specific Firmware because I don't have device's baseband version number.

Pls help me a way which can help me find this number. The device is stuck at samsung J7 logo.

I don't think you need the build number to download the firmware you need the model number which should be at the back of the phone after you pull out the battery and also the region if neccessary..
Have you tried factory reset in recovery mode? See here https://forum.hovatek.com/thread-479.html for how to boot to recoverty..

I have read the tutorial and followed the steps mentioned, the phone cannot boot into recovery. It just stuck at boot logo

Sent from my TECNO M3 using Hovatek mobile
Reply
#7
(04-28-2016, 07:01 AM)naka2903 Wrote: I have read the tutorial and followed the steps mentioned, the phone cannot boot into recovery. It just stuck at boot logo

Sent from my TECNO M3 using Hovatek mobile

already replied @ https://forum.hovatek.com/thread-12845.html
Reply










Users browsing this thread:
1 Guest(s)