Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

flashing mtk backup.. urgent reply

#41
(This post was last modified: 02-09-2015, 11:07 AM by hovatek. )

(02-09-2015, 01:17 AM)gen2bayor Wrote: zip attached
use the scatter file attached below for firmware upgrade



Attached Files
.zip   MT6572_Android_scatter_emmc.zip (Size: 368 bytes / Downloads: 10)
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#42
same error.. spflashtool remains @ 0% for 1minute den bring up the error 4010.. tried version 5 for d firmware upgrade it brought up unrecognized ROM
Reply
#43
(This post was last modified: 02-09-2015, 09:51 PM by hovatek. )
(02-09-2015, 05:04 PM)gen2bayor Wrote: same error.. spflashtool remains @ 0% for 1minute den bring up the error 4010.. tried version 5 for d firmware upgrade it brought up unrecognized ROM
ok. use the original scatter file then sp flash tool v 5. this time around, select the format + download all option
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#44
hello, my tecno m3 is bricked, it start with baseband error
and it doesn't even detect sim card. it later get worse (no
recovery mode and it also get stuck when booting). i
followed your tips and i was able back up and flash it. it
now have recovery mode and booting display but it get
stuck after the booting display. I don't know what to do
again, please help me out.
Reply
#45
(02-16-2015, 01:53 AM)dollinp Wrote: hello, my tecno m3 is bricked, it start with baseband error
and it doesn't even detect sim card. it later get worse (no
recovery mode and it also get stuck when booting). i
followed your tips and i was able back up and flash it. it
now have recovery mode and booting display but it get
stuck after the booting display. I don't know what to do
again, please help me out.

Create a new thread. This is someone else's thread

Sent from my TECNO M3 using Hovatek mobile
Reply
#46
(02-16-2015, 01:53 AM)dollinp Wrote: hello, my tecno m3 is bricked, it start with baseband error
and it doesn't even detect sim card. it later get worse (no
recovery mode and it also get stuck when booting). i
followed your tips and i was able back up and flash it. it
now have recovery mode and booting display but it get
stuck after the booting display. I don't know what to do
again, please help me out.

create a new thread by clicking https://forum.hovatek.com/newthread.php?fid=4 . this is somebody else's support thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)