Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5

TECNO H5 DEAD AFTER FLASHING

#1

Pls I flash one techno h5 and the phone not turning on again ....I downloaded other h5 variants from d download section but always "dram fail error 4032" .....pls help


Reply
#2
(04-30-2016, 03:24 AM)apara Wrote: Pls I flash one techno h5 and the phone not turning on again ....I downloaded other h5 variants from d download section but always "dram fail error 4032" .....pls help

There are 3 variants listed @ https://forum.hovatek.com/thread-311.html
Have you tried all three?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Yea...I av
Reply
#4
(04-30-2016, 10:11 PM)apara Wrote: Yea...I av

That's weird.
How did this start and do you recall the phone's build number?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
The phone WiFi and data connection do ON automatically by itself.....I couldn't remember bcos I didn't check base on the fact I normally flash tecno h5 without any issue

Reply
#6
(05-02-2016, 09:40 PM)apara Wrote: The phone WiFi and data connection do ON automatically by itself.....I couldn't remember bcos I didn't check base on the fact I normally flash tecno h5 without any issue

Have you tried any other H5 firmware apart from these 3
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
(05-03-2016, 01:13 PM)hovatek Wrote:
(05-02-2016, 09:40 PM)apara Wrote: The phone WiFi and data connection do ON automatically by itself.....I couldn't remember bcos I didn't check base on the fact I normally flash tecno h5 without any issue

Have you tried any other H5 firmware apart from these 3

No I haven't because I tot dats d only 3 variants of h5...do you have a suggestion for me?
Reply
#8
(05-04-2016, 09:03 PM)apara Wrote: No I haven't because I tot dats d only 3 variants of h5...do you have a suggestion for me?

do you have access to a working H5?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
(05-05-2016, 12:55 PM)hovatek Wrote:
(05-04-2016, 09:03 PM)apara Wrote: No I haven't because I tot dats d only 3 variants of h5...do you have a suggestion for me?

do you have access to a working H5?


i've the same issue with a tecno H5 too, i flashed with the old firmware at first and it got bricked..i later downloaded the new and it got to work but never got to load to screen, then i flashed it using flashtool and it got totally down. not powering up at all. any help please?
Reply
#10
(08-08-2016, 07:04 AM)dapomubarak Wrote: i've the same issue with a tecno H5 too, i flashed with the old firmware at first and it got bricked..i later downloaded the new and it got to work but never got to load to screen, then i flashed it using flashtool and it got totally down. not powering up at all. any help please?

create a new thread, this is someone else's support thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)