Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Infinix hot note .. Dead

#1
Sad  (This post was last modified: 05-01-2016, 03:25 AM by bravebode. )

I've tried the solution from the big list of sp flash tool errors
Tried to upgrade the android and it said success in the flash tool but the phone dead .. then when i connect it to the pc it just connect for 2 seconds then disconnect then connect again and so on , I took the battery out and it stopped doing the disconnect stuff , but still dead and when trying to install original rom it said this error
Error 4032

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
well i've tried all of them that they're in the big post

Well all of these didn't work for me .. tried the original rom .. backup rom .. nothing .. and it's has the right drivers tried to take out the battery and put it again .. also no respond and the same error


Reply
#2
(This post was last modified: 05-01-2016, 03:20 PM by olak. )
(05-01-2016, 03:23 AM)bravebode Wrote: I've tried the solution from the big list of sp flash tool errors
Tried to upgrade the android and it said success in the flash tool but the phone dead .. then when i connect it to the pc it just connect for 2 seconds then disconnect then connect again and so on , I took the battery out and it stopped doing the disconnect stuff , but still dead and when trying to install original rom  it said this error
Error 4032

Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
well i've tried all of them that they're in the big post

 Well all of these didn't work for me .. tried the original rom .. backup rom .. nothing .. and it's has the right drivers tried to take out the battery and put it again .. also no respond and the same error





Check d file u flashed

X551-G808-a1 is for 16+1gb version



X551-G808-b1 is for 16+2gb version


X551-G808-c1 is for 32+2gb version

If the phone is totally dead u'll need to disconnect d battery terminal and reconnect before ur PC detect ur phone.
Reply
#3
i've already disconnect it and reconnect it again but still dead """" X551-G808-a1 is for 16+1gb version """"
this one
Reply
#4
(05-02-2016, 12:35 AM)bravebode Wrote: i've already disconnect it and reconnect it again but still dead  """" X551-G808-a1 is for 16+1gb version """"
this one

Use the firmware  @ https://forum.hovatek.com/thread-6879.html instead
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(05-02-2016, 12:35 AM)bravebode Wrote: i've already disconnect it and reconnect it again but still dead """" X551-G808-a1 is for 16+1gb version """"
this one

CHeck it very well, i have experienced the problem too, make sure the rom is correct.
Reply










Users browsing this thread:
1 Guest(s)